True2Blue Posted March 14, 2011 Share Posted March 14, 2011 has anyone ever tried to mate a samurai or yota tranny to a ej? ive been searching and id like to see ho hard it would be.. Quote Link to comment Share on other sites More sharing options...
Numbchux Posted March 14, 2011 Share Posted March 14, 2011 Yep. Mudrat did it years ago with his hatch for the Rubicon trip. Nissan tcase behind an EJ 4EAT. Transfer clutches had to be welded up, simply cutting power to the DutyC was not enough to make the car driveable. This would be true of any EJ trans, the VLSD center diff in the MTs would not be strong enough. They'd have to be welded, or replaced with a RWD conversion sleeve. But that would pretty much be the only challenge unique to an EJ. Quote Link to comment Share on other sites More sharing options...
True2Blue Posted March 14, 2011 Author Share Posted March 14, 2011 i was thinkin of mating a Suzuki tranny and tcase to a ej22 and running a 4 link to some sammi axles (i know a frame will need to be made)... im just wondering about the tranny to engine im googling for specs Quote Link to comment Share on other sites More sharing options...
True2Blue Posted March 14, 2011 Author Share Posted March 14, 2011 http://www.ultimatesubaru.org/forum/showthread.php?t=111709&page=21 Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 14, 2011 Share Posted March 14, 2011 Suzuki tranny and clutch setup is too small. Yota stuff is in the works..... GD Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted March 14, 2011 Share Posted March 14, 2011 sammys a devorced case so just need a custom shaft , simple. toyota has the same diameter clutch plate, you will need a custom bellhousing to make it work Quote Link to comment Share on other sites More sharing options...
bratsrus1 Posted March 14, 2011 Share Posted March 14, 2011 Hi Blue This is Jerry, yes i have a sammy setting in my 86 hatchbrat. I live in Selah come on over and see it you can also call me 1-509-952-2855. Thanks Jerry Quote Link to comment Share on other sites More sharing options...
True2Blue Posted March 15, 2011 Author Share Posted March 15, 2011 ill take you up on that as soon as i replace the tbelt on my wagon it slipped on the passengers side while i was up in the evans creek area i THINK i used the tbelt as a shovel/snow blower haha (its open) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.