geckolizard Posted April 11, 2011 Share Posted April 11, 2011 Hey, Does anyone know of a good Subaru Repair shop in or around Portland ? I hate to go to the dealer because they tend to propose more work than you actually need. Need to replace Cam seals and o-rings due to a oil leak. Thanks ! Link to comment Share on other sites More sharing options...
idosubaru Posted April 11, 2011 Share Posted April 11, 2011 GD is a member here and I thought he was in portland. he works on folks cars and knows Subaru's inside and out. have him do it. Link to comment Share on other sites More sharing options...
Fairtax4me Posted April 11, 2011 Share Posted April 11, 2011 Give GD a holler. He'll get you hooked up. General Disorder Link to comment Share on other sites More sharing options...
renob123 Posted April 11, 2011 Share Posted April 11, 2011 Lots of people don't put those seals in right and end up with the same leak 10,000 miles down the road. GD will do it right for way less than the dealer. Jacob Link to comment Share on other sites More sharing options...
Turbone Posted April 11, 2011 Share Posted April 11, 2011 Richie and his Dad do a pretty good job also, with 2 shops in the PDX area. http://www.fixmysuby.com/ Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 11, 2011 Share Posted April 11, 2011 Those are very simple to change. Probably about three hours or so. Send me a PM or an email to cropperr (at) gmail (dot) com GD Link to comment Share on other sites More sharing options...
Olnick Posted April 11, 2011 Share Posted April 11, 2011 Great options, geckolizard. For planning purposes, keep in mind that they will have to open up the engine's front end to do what you ask. That becomes an excellent time to replace timing belt, tensioner, idlers and waterpump--a real time/labor savings in the long run. If you need them, that is. Just something else to ponder! Link to comment Share on other sites More sharing options...
edrach Posted April 12, 2011 Share Posted April 12, 2011 Another vote for richierich and Superior Import Repair. Two shops in Portland. www.fixmysuby.com Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 12, 2011 Share Posted April 12, 2011 I've had a couple of vehicles in my shop (one that I own) that have had their belts and cam seals done by Superior Import. Neither had the cam seals done correctly. As with a lot of shops the quality comes down to who does the job and I'm sure if Richie did it himself things would be different. But you only have so much control over the monkeys. Besides not having any employees other than myself I'm also cheaper GD Link to comment Share on other sites More sharing options...
Qman Posted April 12, 2011 Share Posted April 12, 2011 I've had a couple of vehicles in my shop (one that I own) that have had their belts and cam seals done by Superior Import. Neither had the cam seals done correctly. As with a lot of shops the quality comes down to who does the job and I'm sure if Richie did it himself things would be different. But you only have so much control over the monkeys. Besides not having any employees other than myself I'm also cheaper GD I am sure. Not having to pay for insurance, state industrial, medical benefits for employees not to mention taxes, licenses and such. When one guy comes out and bashes another shops work always makes me wonder why he feels that he needs to do that... just saying due to the fact that the door was opened. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 13, 2011 Share Posted April 13, 2011 When one guy comes out and bashes another shops work always makes me wonder why he feels that he needs to do that... just saying due to the fact that the door was opened. I'm getting tired of all the engines I open up that have leaky cam seals (and front mains) because they were driven in too far or crooked. That's pretty much the extent of my complaint. The dealers and a couple other shops that haven't been drug into this are guilty too - "Mountain Tech" is a big offender since Terry (I think was his name - their resident expert) died a while back..... It seems that very little care is given to the instruction on how to *properly* install seals. Proper seal installation is critical for longest life.... the problem is that the leak won't show up for 10k or 20k or 40k.... entirely dependant on how badly it was installed. But it will not last the 105k till the next belt. And the shop either will not warantee it because "That was over 25k miles ago!" (I have no idea what their warantee period is) or the customer just doesn't know any better. Improper cam seal installation and subsequent leakage is eaily the #1 reason for opening up a timing belt before it's due in my experience when replacement of idlers and water pump are part of the job. Across the board this is routinely missed by mechanics everywhere. I don't know exactly why but I suppose it has to do with their background being in automotive where things are very often simplified far beyond belief for the modern "parts hanger" mentality that pervades even the dealerships. That and most other manufacturers put steps in the bore where the seal goes for the seal to shoulder against insuring it is both flush, not blocking return passages, and straight. Why Subaru does not..... I do not know. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now