idosubaru Posted May 27, 2011 Share Posted May 27, 2011 helped a friend just get a 2002 Subaru OBW H6 VDC lucky for him it came up with a cylinder #1 misfire like a couple weeks after he got it. swapped coil pack and installed a new spark plug: still cylinder #1 misfire. what's next? i'm thinking Seafoam in the gas and probably fuel injector? Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 27, 2011 Share Posted May 27, 2011 You run a compression check on that cylinder? Listen to the injector with a stethescope? Swap injectors or the whole fuel rail to rule it out? GD Quote Link to comment Share on other sites More sharing options...
bstone Posted May 27, 2011 Share Posted May 27, 2011 Rain dance will probably work. I echo what GD says. He's the expert. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted May 27, 2011 Author Share Posted May 27, 2011 copy, thanks GD. i was busy so i was guiding him through the ordeal and only helping as needed. i'll look into the rest of the options. Quote Link to comment Share on other sites More sharing options...
tcspeer Posted May 27, 2011 Share Posted May 27, 2011 I didnt see in your post where you checked or changed the plug wire. I am sure you did, just checking to make sure. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted May 28, 2011 Author Share Posted May 28, 2011 I didnt see in your post where you checked or changed the plug wire. I am sure you did, just checking to make sure.right on, H6 has coil on plug - no plug wires at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.