eppoh Posted June 11, 2011 Share Posted June 11, 2011 Trying to re- assemble an engine someone else took apart- so please excuse all the questions, The face of the block, where the heads mate has 4 holes just about at each corner. I found on one side of the block, there are two hollow pins or sleeves that look like they would be used to locate the head gasket on the block. On the other side there is only one. How many are supposed to be on each side, and how are they inserted and held in? Can't really see them in the manual. Link to comment Share on other sites More sharing options...
General chaos Posted June 11, 2011 Share Posted June 11, 2011 they are probably a slight press fit. and can be removed by wiggling them. that is how slight of a press fit they probably are. Link to comment Share on other sites More sharing options...
MilesFox Posted June 11, 2011 Share Posted June 11, 2011 they just fit in. The one could have pulled out with the head. It could have fallen on the floor. Or it was missing already. Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 11, 2011 Share Posted June 11, 2011 What he said^. Regardless f what happened to the old one, you need a new one. The sleeves align the head to the block and need to be there. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now