kingwill Posted March 9, 2004 Share Posted March 9, 2004 Ok While I was working on my Brat 80' I have the engine out and was realining the flywheel, and as I was torging down the bolts I snapped one off. .............. :madder: :boohoo: What do I do now??? How can I remove the bolt I ripped apart flush with the flywheel? Does any one know any shops in the area that can get me a new flywheel for a 80' brat ?? Can I stick the whole thing back together with one bolt missing? Thank you for any help here Brad Link to comment Share on other sites More sharing options...
ThreeEyedBandit Posted March 9, 2004 Share Posted March 9, 2004 I would go to your local Tool store and get a good quality "E-Z Out", it is a kind of reverse spinning drill bit that has a taper to it. All you need to do is drill a hole in the broken bolt, and insert the E-Z out and most of the time spin it out. Or just get a new Fywheel. Matt Link to comment Share on other sites More sharing options...
GLCraig Posted March 9, 2004 Share Posted March 9, 2004 The first thing I would do is to take the other flywheel bolts out and see if you can get the flywheel off. If you can you should be able to get the rest of the bolt out of the crank with some vice grips.. Link to comment Share on other sites More sharing options...
gonehuntn Posted March 9, 2004 Share Posted March 9, 2004 Ya what GLCraigGT said. You can also try backing it out with a chisel, or a left hand drill bit. Link to comment Share on other sites More sharing options...
asavage Posted March 9, 2004 Share Posted March 9, 2004 I agree on the left-handed drill bit. Works very well. Trouble is, not every hardware store carries them. My two don't -- and even asking for them can get you strange looks. "Whaddaya mean, 'left-handed'?" I assume you broke one of the clutch pressure plate-to-flywheel bolts, as I don't know anybody strong enough to break the flywheel-to-crank bolts. You can sometimes get lucky: remove the pressure plate, dry off your thumb, press it firmly on the broken bolt and turn it counterclockwise. If the threads were oiled, sometimes the bolt will come out this way. Really. If that doesn't work, try teasing it with a No. 00 flat screwdriver. Sometimes you can catch an edge and work it out. If, OTOH, you used locktite, you'll have to drill it. Std. bit + EZ-out, or left-handed bit. Link to comment Share on other sites More sharing options...
bbbs53 Posted March 9, 2004 Share Posted March 9, 2004 If you have access to even a cheap welder, go get a stick of stud plus. Weld a nut to the broken bolt and turn out with a wrench when it cools. It does 2 things for you, expands and cools the stuck threads, gives you something to put a wrench on without re-pulling the flywheel. If the engine is out, it is a snap either way. Good luck. Link to comment Share on other sites More sharing options...
kingwill Posted March 9, 2004 Author Share Posted March 9, 2004 I like the left handed drill but finding that will be harder than finding a spoiler for the back end of a 360, But I think I'll take up the e-z out tap, unfortunatly when I broke off the bolt it was flush with the flywheel, And yes it was a bolt to the clutch plate, still fusterates me that I snapped it off. Some of you guys said about getting a replacement flywheel, Do they sell flywheels for older sub's new? And if so where? Brad Link to comment Share on other sites More sharing options...
Russ Hill Posted March 9, 2004 Share Posted March 9, 2004 Fred meyers has E-Z Outs Brad, so do parts stores. In fact just drop by my place you can borrow mine. Link to comment Share on other sites More sharing options...
rednecksubaru Posted March 10, 2004 Share Posted March 10, 2004 broke a bolt sounds like fun Link to comment Share on other sites More sharing options...
kingwill Posted March 10, 2004 Author Share Posted March 10, 2004 thanks Russ, What part of Vancouver do you live?? and maybe I can use it this weekend Sat. I have to go to a feunral, but sunday after church I'm free. Let me know. Brad Link to comment Share on other sites More sharing options...
Russ Hill Posted March 10, 2004 Share Posted March 10, 2004 I live out toward Camas, near the English pit shooting range. (192nd Ave and 11th street). Near the Soccer fields at the end of 18th street. I'll be up by 2:00 Sunday if you want to come over. Bring the flywheel and we'll pop it out. My number is 253-4385. Link to comment Share on other sites More sharing options...
archemitis Posted March 10, 2004 Share Posted March 10, 2004 it holds the flywheel to the engine? run without it, no big deal, theres something like 7 right? but if its for the pressure plate thats different Link to comment Share on other sites More sharing options...
kingwill Posted March 10, 2004 Author Share Posted March 10, 2004 Thanks Russ I'll give you a call, archemitis it was on the presure plate Brad Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now