Rpm90001 Posted June 13, 2011 Share Posted June 13, 2011 (edited) Would this be considered High temp grease ok to grease the spline and clutch fork parts. I have a tub of this already. Here is a link. I'm also open for suggestions. http://www.valvoline.com/products/brands/synpower/grease/63#b Update....got it covered. Grease came with the exedy clutch kit. I did not see it In there, going to use what exedy sent. Edited June 13, 2011 by Rpm90001 Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 14, 2011 Share Posted June 14, 2011 Usually any type of lithium base grease will do. You need something sticky that will stay on the splines and not fling off onto the clutch disc and flywheel/pressure plate surfaces. Some people use a light coating of anti-seize. I have found a copper spray grease that I like to use because it's less messy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now