jrgaylor Posted March 9, 2004 Share Posted March 9, 2004 So it was a nice day out, so I decide to change the passenger side halfshaft and everything when fine till I went to go for a test drive and I heard a grinding noise, turns out the new halfshaft seems to be slightly bigger than than the output shaft on the transmission and it was spinning on the shaft and broke the rollpin. Has anyone had this happen to them? A few months ago when I changed out the driver side halfshaft I had to return that one to schucks to get the correct one as the first one I got was two short. What is this with schucks? maybe I need to go back to shopping only at Napa. -end of rant- Link to comment Share on other sites More sharing options...
baccaruda Posted March 9, 2004 Share Posted March 9, 2004 schucks is 100% crap-on-a-stick. lesson learned! Link to comment Share on other sites More sharing options...
Turbone Posted March 9, 2004 Share Posted March 9, 2004 Sounds like you got a axle meant for a Turbo tranny. Its 25 splines. Altho I'm not sure how it fit on there. Maybe it wasnt even a Subaru axle? Thats typical for Schmucks. Link to comment Share on other sites More sharing options...
calebz Posted March 9, 2004 Share Posted March 9, 2004 Yeah.. those great guys.. I bought 2 axles from them with a lifetime warranty. I was moving from washington to texas.. they told me when I bought them that there was a store in Dallas.. Now that I need to return one of the axles for warranty work, the closest store is over 400 miles away in new mexico Link to comment Share on other sites More sharing options...
subieman Posted March 9, 2004 Share Posted March 9, 2004 Yeah I bought a axle from Kragen (same as Schucks I guess). The boot tore and the CV went bad within the year. Oh and I cant ever seem to get a good alternator from them.. Grrrrr Link to comment Share on other sites More sharing options...
ShawnW Posted March 9, 2004 Share Posted March 9, 2004 Give me a used alternator and axles anyday. (I love parts cars and PNP) Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 9, 2004 Share Posted March 9, 2004 Andrew had the same problem with gettin an axle for his old '83 GL-10. They gave him the wrong one because they had the wrong part #. They had given him the one for an EA82. So they FINALLY got the part number right so now he knows what part number to ask them. But yeah man, I feel your pain. Link to comment Share on other sites More sharing options...
hatch4x4 Posted March 9, 2004 Share Posted March 9, 2004 I know that grind... 25 spline on a 23 tooth stub, cept I bought mine at the junkyard. Side note re: schucks, 2 out of 3 clutch kits were no good. I'm gettin pretty good at this whole engine removal thing Yeah yeah some say going from the tranny side is easier, I don't care, I can get the engine out in less than an hour, why change? Link to comment Share on other sites More sharing options...
SubSandRail Posted March 9, 2004 Share Posted March 9, 2004 I agree with ShawnW. I am 10 minutes from a PAP and buy everything used. They always have what I need, and at their prices you can get two parts, one for the replacement and one for a backup. The huge availability of cheap local parts is part of what made me decide to offroad 83-84 soobs. Link to comment Share on other sites More sharing options...
calebz Posted March 9, 2004 Share Posted March 9, 2004 Yup.. in your area thats true ( I grew up in Tacoma) Down here.. different story.. Us locals have only been able to find one turbo car in the yards... so we bought the whole thing and completely stripped it right there in the yard. Link to comment Share on other sites More sharing options...
jrgaylor Posted March 10, 2004 Author Share Posted March 10, 2004 Went and got a new halfshaft from carquest and all is well, the splines got a little chewed up but i manage to get it on, gettinbg it off in the future may be fun:burnout: Link to comment Share on other sites More sharing options...
subiemech85 Posted March 10, 2004 Share Posted March 10, 2004 Jockos 6904 $59.95 $40 Oreilly 60-7008 $59.99 $30 Napa 7307 $68 $56 Carquest 9110 $69.99 $53 autozone 7312 $79.99 $35.00 autozone SB- 8004 $89.99 new store part# cost core Link to comment Share on other sites More sharing options...
scubaroo Posted March 13, 2004 Share Posted March 13, 2004 schucks just remove the (ch) nuf said. couldn't even get u-joints for 75 chysler right. never went back. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now