92_rugby_subie Posted June 19, 2011 Share Posted June 19, 2011 Ive been looking into the green 78 4X4 on Portland Craigslist for my dad. I have some qualifications that it will have to have/things done. Swaps: EA71 motor is completely disassembled, debating if I should do the EA71 or if I should swap an EA81 or EA82 into it (My dad can handle the power of these responsibly and the more get up and go it has the better, on the cheap end, thats why no EJ swap) I will be putting a Weber 32/36 DGEV on it of course! 4 Speed D/R to a 5 Speed D/R - Advantages? Disadvantages? Plug and Play? Ill probably keep the interior as it is, depending on its condition, I suppose I might swap in other seats just for comfort if I find them cheap enough. This could start to be the build thread, going to talk to the current owner more and if my dad can fund it I will pick it up, fix it and then drive it down to him. No matter what - this has to pass California State Emissions, he's moving to Monterey California and has been car-less since he gave me his Loyale in November 2 years ago so I think this is a good way to pay him back Not a bad learning experience either Link to comment Share on other sites More sharing options...
92_rugby_subie Posted June 19, 2011 Author Share Posted June 19, 2011 With some reading... How much would it cost to do an SPFI swap onto the 78? Would it be a SPFI EA82 in there? Would that work mated to a D/R 5 Speed? That way its start-up and go no need to warm up Link to comment Share on other sites More sharing options...
biffanyus Posted June 20, 2011 Share Posted June 20, 2011 Very cool post pics when you get her.... Next to the Gen 1 Brat these are my next favorite looking subies and then the Gen 2 Brat.... Link to comment Share on other sites More sharing options...
fignuts Posted June 21, 2011 Share Posted June 21, 2011 Here are picks - i'd been eyeing it for awhile: http://portland.craigslist.org/mlt/cto/2439328999.html If you change from the ea71 you will have to swap the trans as well - the bell housings are different. If you go to a 5 speed you will need a custom driveshaft. If you go to a 4 speed d/r you will have to go to an ea81 due to bellhousing/motor mating differences. If you want to swap it the best way is to just ej22 it and be done with it, but then you have to notch the framerails.... Oh, you'll never pass California emission with a weber. So, wait to swap on a weber until after it has passed Cali emissions. Hope this was somewhat helpful and good luck! It looks to be a fun project Link to comment Share on other sites More sharing options...
92_rugby_subie Posted June 21, 2011 Author Share Posted June 21, 2011 Havent heard anything back from the owner :/ hoping we get it to fix it up and stuff. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now