Kostamojen Posted June 22, 2011 Share Posted June 22, 2011 I'm looking for a pilot bearing with the dimensions of 33 OD, 12 ID for my FF-1 project. From what I've been reading, the 80's models used the bearings and not the internal crank "bushings" and I want one of the 80's style bearings for my EA63 flywheel. Does anyone have one handy to see what the dimensions are? Quote Link to comment Share on other sites More sharing options...
capn_r Posted June 22, 2011 Share Posted June 22, 2011 Here are dimensions for Napa bearing number BRG 62012RSJ It appears they are 32mm od. Below is the sube's napa's information says they fit. Clutch Pilot Bearing I.D. : .4724" Clutch Pilot Bearing O.D. : 1.2598" Clutch Pilot Bearing Width : .3937" Subaru 1300 1972 - 1972 Subaru 1400 1973 - 1976 Subaru 1600 1976 - 1987 Subaru 1800 1980 - 1989 Subaru B9 Tribeca 2006 - 2007 Subaru Baja 2003 - 2006 Subaru Brat 1978 - 1987 Subaru Chaser 1990 - 1991 Subaru Forester 1998 - 2008 Subaru Impreza 1993 - 2008 Subaru Legacy 1990 - 2008 Subaru Loyale 1990 - 1994 Subaru Outback 2000 - 2008 Subaru Star 1971 - 1971 Subaru SVX 1992 - 1997 Subaru Tribeca 2008 - 2008 Subaru XT 1985 - 1991 Quote Link to comment Share on other sites More sharing options...
Redcap Posted June 22, 2011 Share Posted June 22, 2011 Personally, I would use a bushing if you could find the proper size. Quote Link to comment Share on other sites More sharing options...
Kostamojen Posted June 22, 2011 Author Share Posted June 22, 2011 Well its pretty close between 32 and 33, It could be 32. Quote Link to comment Share on other sites More sharing options...
Kostamojen Posted June 22, 2011 Author Share Posted June 22, 2011 After seeing that list, I realized I still had a flywheel from my Impreza laying around. I tested it out, the 32mm is just a touch too small for some reason :-\ It just slides right through! Is there a "plus" sized bearing by any chance? I can't find anything listed at 33mm, and 33 might even be too large. Quote Link to comment Share on other sites More sharing options...
Kostamojen Posted June 23, 2011 Author Share Posted June 23, 2011 Son of a ***************! Just went looking through one of my part manuals on a whim... 806212030 Ball Bearing 12x32.5x10 And amazingly, I had a left over EA71 flywheel with that exact bearing on it... Fits perfect!!! It is indeed .5mm larger! Now I just need to find a new one... Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 23, 2011 Share Posted June 23, 2011 Does it have a rubber seal on it? Look on the seal for a part number you can cross reference. Otherwise 1stsubaruparts.com lists it for $18 and change. Quote Link to comment Share on other sites More sharing options...
Kostamojen Posted June 23, 2011 Author Share Posted June 23, 2011 I checked the bearing number, nothing matches it (searched the internet). But ya, they are still available via Subaru. Just ordered one, will be here Saturday Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 24, 2011 Share Posted June 24, 2011 Out of curiosity, what is the number? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.