subinewby Posted June 26, 2011 Share Posted June 26, 2011 (edited) So I was drivin today and as soon as I pull into the store I put the coupe in 1st and it made a grinding sound but would not drive. IDK if its a throw out bearing or what, Ive still got compression in the cluth pedal but the car wont move. Does anyone around Vancouver wanna come and check it out -possibly fix .I wish I knew how to on my own but anyways I appreciate the help. Edited June 26, 2011 by subinewby Link to comment Share on other sites More sharing options...
El Presidente Posted June 26, 2011 Share Posted June 26, 2011 What year/what tranny? I learned recently learned the 5MT's aren't designed to go into 1st while rolling which made me happy because I thought my 1st gear syncro was shot. If you got a broken clutch cable, you still can get around by disabling any neutral start switch and starting it in 1st, then "syncro matching" to up shift. Don't down shift though, for that matter, don't ever down shift unless you really need the braking power, just shift to neutral and apply the brake. Link to comment Share on other sites More sharing options...
subaruguru Posted June 26, 2011 Share Posted June 26, 2011 Put it in 4wd and try to move it if it moves you lost a front axle. Another way is to put it in gear apply e break with engine running get out and look at both front axles FROM UNDER THE HOOD DO NOT LOOK UNDER THE CAR woulnt wnat it to catch and run you over anyways the broken one will be spinning. happened to me twice on my old ea81 and with the lift that is on that coupe i bet you lost an axle. Cheers R. Link to comment Share on other sites More sharing options...
subinewby Posted June 26, 2011 Author Share Posted June 26, 2011 Its an 83 EA81 with a 5speed D/R .I've tried starting it in gear and it wont go anywhere, it makes a sound like the teeth are grinding or worn out or something. Link to comment Share on other sites More sharing options...
subaruguru Posted June 26, 2011 Share Posted June 26, 2011 did you try what i said? i can can almost bet you just lost an axle and if you put it in 4wd it should move. Cheers R. Link to comment Share on other sites More sharing options...
subinewby Posted June 26, 2011 Author Share Posted June 26, 2011 ya it works in 4wd Link to comment Share on other sites More sharing options...
MilesFox Posted June 26, 2011 Share Posted June 26, 2011 so now this is an axle issue and not a clutch issue. This makes it easier, and less costly to repair. If you put it back in 2wd, set the parking brake and put the car in gear. Observe whch axle you can see turning. If none are turning, observe the inner end. If one side is turnong, you found your culprit. If the whole shaft is turning, the outer end is busted. If the axle nut is turning, then it's a stripped hub caused by loose/improperly installed axle nut. Link to comment Share on other sites More sharing options...
subinewby Posted June 27, 2011 Author Share Posted June 27, 2011 Yup it's an axle, whew I was thinkin it wasnt gonna be cheap. the whole thing spins. Link to comment Share on other sites More sharing options...
subaruguru Posted June 27, 2011 Share Posted June 27, 2011 imagine that Cheers R. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now