mickytrus Posted March 9, 2004 Share Posted March 9, 2004 Does anyone have any suggestions about gasket manufacturers? I had talked to this one guy a ways back... (subie shop veteran). He said, only use subie OEM gaskets.......... Does anyone out there agree/disagree know of a better manufacturer? The vehicle is 91 subie loyale 1.8L thanks Link to comment Share on other sites More sharing options...
Buddythedog Posted March 10, 2004 Share Posted March 10, 2004 In a perfect world, I'd go out and harvest my $$$ and buy only OEM, but since I drive an 11 year old Subie (which I love dearly), I've found that Felpro work just fine. My car leaks with Subie gaskets now, so the others can't be worse. Link to comment Share on other sites More sharing options...
MilesFox Posted March 10, 2004 Share Posted March 10, 2004 napa victor series gaskets, the package lists parts as made in japan. a set will run about 100-200 bucks depending on if you are doing the heads or not. you can get the seals fairly cheap for the cam and crank seals, oil pump seal is not too much the napa gaskets are of better quality than the felpro, but felpro is less costly, and they work just as fine Link to comment Share on other sites More sharing options...
mickytrus Posted March 10, 2004 Author Share Posted March 10, 2004 Thanks for the info... Yeah, I read another post yesterday... a thread started by someone else...... I am in new york....... we get ripped off on everything over here...... so anyway.... OEM parts goto http://www.1stsubaruparts.com A very cool place So i bought OEM gasket set and a OEM clutch kit......... The OEM KIT at this site was 75 dollars cheaper than an aftermarket kit at a place where I have a charge account... the gasket set was 75 dollars cheaper than the OEM kit at a subie joint over here........: Thanks again internet folk! Micky Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now