bergle Posted July 4, 2011 Share Posted July 4, 2011 Hey all. Got a 1993 Legacy that is overheating. Obviously head gasket is suspect, but there is no oil in the water or water in the oil. The thermostat has been replaced. It drives for around 10 miles and overheats, but there is still plenty of water in there? Any thoughts? Link to comment Share on other sites More sharing options...
Ricearu Posted July 4, 2011 Share Posted July 4, 2011 rusted impeller on water pump or crappy thermostat. head gaskets are RARELY suspect on ej22's, that was only on ej25's. replace thermostat with a DEALER ONLY thermostat and try again. if not, look at water pump. you could get a block test done to test for combustion gases in the coolant Link to comment Share on other sites More sharing options...
markjw Posted July 4, 2011 Share Posted July 4, 2011 Hey all. Got a 1993 Legacy that is overheating. Obviously head gasket is suspect, but there is no oil in the water or water in the oil. The thermostat has been replaced. It drives for around 10 miles and overheats, but there is still plenty of water in there? Any thoughts? Every ej22 motor I have come across with a blown head gasket (two so far) has exhibited your exact symptoms. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 4, 2011 Share Posted July 4, 2011 Head gasket - classic symptoms. Sorry about your luck. GD Link to comment Share on other sites More sharing options...
moosens Posted July 4, 2011 Share Posted July 4, 2011 Did you remove the square head plug on the passenger side top of the radiator and backfill the radiator that way when the thermostat was replaced? If not , you need to. Link to comment Share on other sites More sharing options...
bheinen74 Posted July 4, 2011 Share Posted July 4, 2011 air in the coolant system? before you go any further do the proper burp / belch of the coolant air. Link to comment Share on other sites More sharing options...
bergle Posted July 5, 2011 Author Share Posted July 5, 2011 How do I go about belching the coolant? Also, if it is the head gasket, how much should I expect to spend on getting it fixed? Link to comment Share on other sites More sharing options...
jboymechanic Posted July 5, 2011 Share Posted July 5, 2011 How do I go about belching the coolant? Also, if it is the head gasket, how much should I expect to spend on getting it fixed? If you are able to do it yourself, about $200 to $250 for the all the gaskets (head, intake manifold, exhaust manifold, valve cover), seals (crank and cam), timing kit (belt, water pump, and pulleys/tensioners) and maybe even radiator hoses. It is not very technically challenging work, but it can be labor intensive. If you take it somewhere to be done, it can be rather expensive (pushing $1000 in my area). Link to comment Share on other sites More sharing options...
moosens Posted July 6, 2011 Share Posted July 6, 2011 Did you remove the square head plug on the passenger side top of the radiator and backfill the radiator that way when the thermostat was replaced? If not , you need to. Link to comment Share on other sites More sharing options...
bheinen74 Posted July 6, 2011 Share Posted July 6, 2011 with heat temp select to hottest....that way you fill the heater core too, helping remove air. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now