rallyruss Posted March 10, 2004 Share Posted March 10, 2004 I need to find a mounting location for my oil cooler. has any one done this yet? where did it fit? first off many thanks to WJM for promptly sending out the oil cooler adapter. I have some ideas. #1 I have a tranny cooler off a dodge diplomat. measures aprox 12" by 6" and 2" thick. it will fit in front of the a/c condensor. plumbing will be tricky but as long as it stays small (hose ID) It will work. dont know if running a tranny cooler is a good idea though. #2 plumb it into the radiator where the tranny cooler lines are supposed to go. once again a tranny cooler? and lack of actual cooling. #3 A volvo OIL cooler. rather small but its meant for oil and can be mounted closer to the source. I have acess to hyd. hose equipment so building my own lines will not be a problem. hydraulic hoses are super durable and can be removed easy. any ideas? experience? yes I tried a search first. Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 OK! Heres what I did....lemme find the pics.... Yes, i used a trans oil cooler as well. Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 another Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 and another... Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 and another... Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 and another... Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 and the last one. Link to comment Share on other sites More sharing options...
rallyruss Posted March 10, 2004 Author Share Posted March 10, 2004 dam is that one of those externaly lubricated motors? seriously though I see what you have going there. thats along the lines of my plan #1. I think my cooler is more restrictive than that one. a limited flow ability thru the cooler should not affect the vehicles Oil pressure or flow right? oiling systems make me nervous. just want to do it up right. Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 it will create more pressure, as resistance to flow is pressure. You want the cooler setup to flow as freely as possible...which mine does not...as i would like to have AN fittings and a slightly different cooler core...but ti works fine. And I did have some leaking issues...just make sure everything is tight. Link to comment Share on other sites More sharing options...
rallyruss Posted March 10, 2004 Author Share Posted March 10, 2004 ok that means the volvo oil cooler is probably the best bet. thanks WJM has anyone else installed one yet? I know you distributed a few others. Link to comment Share on other sites More sharing options...
WJM Posted March 10, 2004 Share Posted March 10, 2004 No prob. Ive gotten no word from anyone else. Ive sent out alot...more than 10 i think.. Link to comment Share on other sites More sharing options...
oddcomp Posted March 10, 2004 Share Posted March 10, 2004 hmm i need to install this saab 9000 turbo oil cooler Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted March 10, 2004 Share Posted March 10, 2004 tranny coolers do work good. They have very little resistance, and good thermal conductivity, i.e. they are used to cool off the high temps of tranny fluid. I've got a copper oil cooler, aftermarket type that was used for a Turbo 400. Works really well, I've seen a drop as much as 50 degree's between the input and output. Here's a pic: Link to comment Share on other sites More sharing options...
CIS Subaru Posted March 10, 2004 Share Posted March 10, 2004 I was told that tranny oil coolers weren't meant to operate under as much pressure as engine oil coolers. Anyone agree/disagree? When I bought my EA81T engine, the junkyard wanted to charge me extra for the oil cooler, so I left it behind. Since then, I've been looking for a good alternative. I looked at a Volvo unit, and they are a good bit larger than the factory EA81T units. I think that's what I'll use. What type of hose are you guys using to connect your oil coolers? Link to comment Share on other sites More sharing options...
oddcomp Posted March 10, 2004 Share Posted March 10, 2004 thats really funny since trannys run at higher line pressure from what i am read on how auto trannys work usually the tranny units and the oil cooler units are pretty much the same stuff you get out of a jegs or other perfomance catalog is usually universal unless specified just look at the psi rating on the coolers if its good for over 50 you should be ok i mean lets face it how many have seen soob pressure over 40? or even 30 hehe Link to comment Share on other sites More sharing options...
rallyruss Posted March 10, 2004 Author Share Posted March 10, 2004 ok I thought I had heard this before but the first search I did came up with this. http://www.perma-cool.com/faq/coolers.html#no I wonder what CCR has to say about oil coolers mabey I will ask. dont want to void a waranty. oh as for the hose issue. like I said I make up hydraulic lines that are good for 3000 psi or higher with crimped on fittings. JIC connections that are really easy to remove. they are really strong. did it on a VW rabbit once. came out really nice. Link to comment Share on other sites More sharing options...
WJM Posted March 11, 2004 Share Posted March 11, 2004 I used some 1/2 fuel line good for 300 PSI, and the trans oil cooler I am using is IDENTICLE to the engine oil cooler that hayden sells...BOTH are rated at 300 PSI. BTW: Hayden automotive makes these adapters and coolers that i use. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now