pinchewey Posted July 11, 2011 Share Posted July 11, 2011 anybody now if is possible mount the EA82 on my 1991 brat that is with the original EA81 .. but is in bad condition.. and repair is more expensive than buy an a new EA82 Link to comment Share on other sites More sharing options...
NoahDL88 Posted July 12, 2011 Share Posted July 12, 2011 It is possible to put an EA-82 into a car that came with an EA-81. A lot of people will give you reasons not to do it, but if you need your car running, you need your car running. Link to comment Share on other sites More sharing options...
pinchewey Posted July 12, 2011 Author Share Posted July 12, 2011 some specific adaptation that i have to consider? Link to comment Share on other sites More sharing options...
NoahDL88 Posted July 12, 2011 Share Posted July 12, 2011 Yes, someone will chime in with what specifically, but if it came from a carbed model it should just drop in. Link to comment Share on other sites More sharing options...
pinchewey Posted July 12, 2011 Author Share Posted July 12, 2011 sorry, what you reffer with "carbed".. Link to comment Share on other sites More sharing options...
MilesFox Posted July 12, 2011 Share Posted July 12, 2011 it will bolt up the same. Use ea82 flywheel. Eliminate or re-locate the hill holder Use ea82 exhaust header You may have to clock the disty differently to clear the master cylinder. you will have to figure out the electrical for the ea82 carb setup. the ea81 manifold will fot the ea82, but some modification to the egr valve is necessart to fit around the bellhousing. use an ea82 radiator Link to comment Share on other sites More sharing options...
pinchewey Posted July 12, 2011 Author Share Posted July 12, 2011 thanks, i will upload some photos when will be ready (i still don`t know i i will fix the EA81 or buy a used EA82 working). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now