coolskaterkid Posted July 29, 2011 Author Share Posted July 29, 2011 so to my surprise when i got the cam pulley off the cam seal wasnt even sitting in place it had completely came out and was just sitting loose on the cam. I got the new one in and all is well so far but i fear if it came out once it could do it again Link to comment Share on other sites More sharing options...
1-3-2-4 Posted July 29, 2011 Share Posted July 29, 2011 That's odd.. Link to comment Share on other sites More sharing options...
coolskaterkid Posted July 29, 2011 Author Share Posted July 29, 2011 sure is worries me a bit Link to comment Share on other sites More sharing options...
heartless Posted July 29, 2011 Share Posted July 29, 2011 while the seal coming out IS an oddity - my money would be on that it didnt get properly seated - i am going to guess that this car has had the seals changed at some point previously, right? when was the last timing job?? the seals typically get changed during a timing belt replacement. Link to comment Share on other sites More sharing options...
1-3-2-4 Posted July 29, 2011 Share Posted July 29, 2011 That's all I can think of as well they drove it in crooked. Link to comment Share on other sites More sharing options...
coolskaterkid Posted July 29, 2011 Author Share Posted July 29, 2011 The last belt was done at 150k by a subaru only mechanic. It now has 192k on it, i dont have the receipt, so i dont know if they were replaced then. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now