dec0y13 Posted July 25, 2011 Share Posted July 25, 2011 I'm trying to wire my BRAT back to where everything works. I can't seem to get the 4WD light to come on in the gauge cluster. When I put in in 4WD lo the "LO" icon lights up. I have the black switch that connects to the 4WD shifter and it tests good, but I'm not sure if it does anything. I cant seem to find the switch for the lo gears anywhere. I wonder if the 4WD indicator switch is close by? Am I looking in the wrong place? Does this switch do anything? Where is the 4WD indicator switch? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 25, 2011 Share Posted July 25, 2011 That's it - the black switch is the 4WD indicator swith. The Lo range switch is inside the transmission. Are you positive the bulb isn't burnt out? GD Link to comment Share on other sites More sharing options...
bheinen74 Posted July 25, 2011 Share Posted July 25, 2011 that switch is supposed to mount so the backstop on the lever pushes it in, that then light is supposed to go on for 4wd. the lo is built into the trans, no external switch for lo. The black switch is only to indicate 4wd....now....since the switch is undone from the hole it mounts in, can you push the plunger in, and see if the light comes on for 4wd.? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 25, 2011 Share Posted July 25, 2011 Pluger OUT turns the light on. So the light should be on all the time with the switch dismounted like that. Thus my question about the bulb being burnt..... GD Link to comment Share on other sites More sharing options...
bheinen74 Posted July 25, 2011 Share Posted July 25, 2011 doh yeah sorry plunger out making contact.. you could take a sandpaper and clean the contacts..... Link to comment Share on other sites More sharing options...
dec0y13 Posted July 25, 2011 Author Share Posted July 25, 2011 Yeah I wonder if the bulb is burned as well. I figured that the plunger "out" meant it would be on all the time. Pushing it in and out does not do anything. I'll test the wiring and then pull out the cluster to check the bulb. thanks guys, really big help so far Link to comment Share on other sites More sharing options...
dec0y13 Posted July 26, 2011 Author Share Posted July 26, 2011 Yep, bulb was burnt. I was able to harvest another plunger from the junkyard. Now the light works, but I have so much slop in my 4WD shifter that it still doesn't show me in 4WD when I shift. Well, at least that's an easier one to fix Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now