Bdubya Posted July 30, 2011 Share Posted July 30, 2011 So my Ac/Heater Fan Only works on the first 3 settings, The Blower Motor and Resister was replaced when I bought the car.. I would like to swap out the switch myself however I can not seem to locate the the access point to get the switch out. Please help! Thanks! Link to comment Share on other sites More sharing options...
TomRhere Posted July 30, 2011 Share Posted July 30, 2011 Year/Model would greatly help here. Differences between Year/Models. Link to comment Share on other sites More sharing options...
Bdubya Posted July 30, 2011 Author Share Posted July 30, 2011 Duh! Sorry about that, posted real quick while i was at work.. Anyway, It is a 1990 Loyale Wagon many thanks Link to comment Share on other sites More sharing options...
Bdubya Posted August 1, 2011 Author Share Posted August 1, 2011 Do you have to take apart the dash to do so? If so how do you take the dash out? Link to comment Share on other sites More sharing options...
TomRhere Posted August 2, 2011 Share Posted August 2, 2011 If your '90 is anything like my '88, No need to remove dash cluster. Pull the knob off the switch, remove the 2 screws there. Drop the trim panel under the steering column and you can reach up and grab the switch. Could be a bit tricky to unplug/replug the connector though, especially if you have big hands like me. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now