Snake River Posted August 1, 2011 Share Posted August 1, 2011 Hello everyone I am new to you forum and represent Pacific Powertrain, we import never installed low hour test bench Subaru engines incluing the EE20. We have viewed this forum for some time and have decided that this would be a good time for our first post. We are located in SE Washington state and origionaly started looking at the Subaru engine to offer to the jet boat industry as a low profile, light weight, 4 stroke motor. In doing so are now becoming involved with many other applications including the automotive industry and we look forward to being involved with this forum. Link to comment Share on other sites More sharing options...
RAugur33 Posted August 4, 2011 Share Posted August 4, 2011 Do you have a way to attach a subaru engine to a velvet drive transmission? I always thought a subaru motor would be more efficient than my ford V8. Link to comment Share on other sites More sharing options...
Snake River Posted August 8, 2011 Author Share Posted August 8, 2011 Not yet but I am working on that for my Ford V8 Also!!!! LOL Link to comment Share on other sites More sharing options...
vince0945 Posted January 30, 2012 Share Posted January 30, 2012 Is there a specific transmission that the ee20 has to be connected to? Link to comment Share on other sites More sharing options...
Quidam Posted January 30, 2012 Share Posted January 30, 2012 Bump. If you get your hands on some FA or FB engines, please post them up. Thanks. Doug Link to comment Share on other sites More sharing options...
Snake River Posted January 30, 2012 Author Share Posted January 30, 2012 At this point in time we have FB25 engines and have one in prototype to develop our marine package. WE have not seen any of the newer FB20 engines yet but as soon as we do I will get some pictures sent out. Link to comment Share on other sites More sharing options...
Caboobaroo Posted February 3, 2012 Share Posted February 3, 2012 Complete EJ257 and 6mt prices please. Apparently my boss tried to get ahold of you through your website a few months ago but there was no reply. We are an independent Subaru repair facility in Kirkland, WA and we do a lot of engine work. I will see if he can email you again but his email address is Justin@allwheeldriveauto.com Link to comment Share on other sites More sharing options...
jonnyr18 Posted February 17, 2012 Share Posted February 17, 2012 Hi, I am a subaru fanatic like most of us! Well I just ingested water in to my 05 subaru WRX and am searching a replacement with my insurance money$$$$. So here I am searching through Craigslist in Washington state and came across (Pacific Powertrains web site ) well I got kind of excited that may be I would have a solution about getting my SUBIE back on the road. Well I email them stating that I had blown my engine and that I was looking for a 2.2 and that I could use some help and suggestions on what I should do? they answered back( I sold my last 2.2 and that I should consult my local mech) Wow great sales technique!! so I didn't get discouraged so I said any help would be great! and I got back check out your local jdm SITES lol,lol So I asked if they where going out of business? WOW if there not they might be headed that way..... NICE way to treat some one with MONEY and a great attitude!!!!! Thanks Pacific power inc........ Link to comment Share on other sites More sharing options...
Snake River Posted February 20, 2012 Author Share Posted February 20, 2012 As I replied to you in your e-mail we specialize in late model engines. I can supply you with a EJ255 however it would not be a direct and may require changes made before instalation. I told you that I did not have the engine you requested and that you should contact your local mechanic for suggestions as to what you might use. We would rather miss a sale than to sell someone something that we nor they are posotive will fit into the vehicle. Link to comment Share on other sites More sharing options...
SkankinPickle Posted May 20, 2012 Share Posted May 20, 2012 Is the FB20 or FB25 bellhousing in anyway compatible with the older EJ's? Link to comment Share on other sites More sharing options...
Snake River Posted May 21, 2012 Author Share Posted May 21, 2012 I do not have an answer for that question. Our purpose for importing the engines is to use them in the Jet Boat industry and we have done no fitment work on the bellhousing as our housing has to be a custom built unit. Link to comment Share on other sites More sharing options...
Prwa101 Posted May 21, 2012 Share Posted May 21, 2012 How much are the EE20's running for?? Does the come with the whole set up, harness? Thanks. -Prwa Link to comment Share on other sites More sharing options...
Snake River Posted May 22, 2012 Author Share Posted May 22, 2012 The FB25 bellhousing is considerably differant than the EJ25 and would not be compatable, the EJ20 is something that we have never done any fitment work on and I would suggest that you consult your local dealer. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted May 22, 2012 Share Posted May 22, 2012 How much are the EE20's running for?? Does the come with the whole set up, harness? Thanks. -Prwa maybe these guys can help; http://boxeer.com/ Link to comment Share on other sites More sharing options...
Prwa101 Posted May 22, 2012 Share Posted May 22, 2012 (edited) maybe these guys can help; http://boxeer.com/ Haha yeah I've already seen it! I actually started a thread about it. I was just curious how much they were selling them for, and if ist came will all the goodies Wanting to drop it into a ol GL, EA series. It's be a monster! Edited May 22, 2012 by Prwa101 Link to comment Share on other sites More sharing options...
ivans imports Posted May 22, 2012 Share Posted May 22, 2012 ? you guys can dyno a engine on the bench ? is that right Link to comment Share on other sites More sharing options...
Snake River Posted May 23, 2012 Author Share Posted May 23, 2012 We are currently sold out on the EE20 engine. The engine we import generally comes with the engine harness, alternator, A/C compressor, sensors, engine fuel supply system, and intake manifold. We could but do not bring in the exhaust, clutch assembly or ECU. WE are working on modifying this engine to use in welded aluminum jet boats and will not be able to use the stock items on the boats. Small Car Performance has a working ECU and is finishing a Volkswagon van conversion kit for the Vanagon. www.smallcar.com. Brian has done a lot of work on making this engine work and is very knowlegable on this conversion. Once we get more engines in I will be able to post the current cost. If anyone wants to see how they come PM me and I will send you pictures of the basic engine we generally receive. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted May 23, 2012 Share Posted May 23, 2012 We are currently sold out on the EE20 engine. The engine we import generally comes with the engine harness, alternator, A/C compressor, sensors, engine fuel supply system, and intake manifold. We could but do not bring in the exhaust, clutch assembly or ECU. WE are working on modifying this engine to use in welded aluminum jet boats and will not be able to use the stock items on the boats. Small Car Performance has a working ECU and is finishing a Volkswagon van conversion kit for the Vanagon. www.smallcar.com. Brian has done a lot of work on making this engine work and is very knowlegable on this conversion. Once we get more engines in I will be able to post the current cost. If anyone wants to see how they come PM me and I will send you pictures of the basic engine we generally receive. got any pics of your boats? Link to comment Share on other sites More sharing options...
Snake River Posted May 23, 2012 Author Share Posted May 23, 2012 Check out Hells Canyon Marines web site and SJX Boats web site, this will give you an idea of the type of manufacture we will be dealing with. The boats will be 17 to 21 feet in length. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now