Rpm90001 Posted August 13, 2011 Share Posted August 13, 2011 (edited) Well I made 2 short videos the first one is a cold start up (it's in the 70's this morning) and the second is after a 5 minute drive. if I would of driven a little farther in the second video it would be quiet. But you will see after a short drive it is a lot quieter. Piston slap? is what it piston slap sounds like? All timing components have been changed so i know its not the tensioner piston slap?? Thoughts? this is after a short 5 minute ride. It would quiet even more if i drove a little longer. http://www.youtube.com/watch?v=l8DqeCiyQFA&sns=em I just replaced the last video, I posted the first video twice... Edited August 14, 2011 by Rpm90001 Link to comment Share on other sites More sharing options...
coolskaterkid Posted August 13, 2011 Share Posted August 13, 2011 i have the same damn noise maybe a little worse, hopfully you get an answer cause i would like to know also Link to comment Share on other sites More sharing options...
bheinen74 Posted August 13, 2011 Share Posted August 13, 2011 sounds like the beginning of a flexplate crack. Link to comment Share on other sites More sharing options...
coolskaterkid Posted August 13, 2011 Share Posted August 13, 2011 interesting, mine will really make a racket on most starts and makes more noise as it revs, but it can be herd at idle once hot. Link to comment Share on other sites More sharing options...
Rpm90001 Posted August 14, 2011 Author Share Posted August 14, 2011 It a manual transmission. Link to comment Share on other sites More sharing options...
coolskaterkid Posted August 14, 2011 Share Posted August 14, 2011 well wouldnt be the flex plate on yours i think mine is more piston slap also Link to comment Share on other sites More sharing options...
bstone Posted August 14, 2011 Share Posted August 14, 2011 I got the same noise. It usually goes away after a few minutes. Link to comment Share on other sites More sharing options...
jboymechanic Posted August 14, 2011 Share Posted August 14, 2011 Sounds like piston slap to me. Link to comment Share on other sites More sharing options...
Rpm90001 Posted August 14, 2011 Author Share Posted August 14, 2011 (edited) After pulling the motor and all the work that went in to it, it's a little embarrassing to start it up and hear ticking. If it slap, I'm just going to ignore it. I just want to male sure I'm not over looking something that can be fixed. The first day of posting the Video, I posted 2 of the same video. Posted the first video twice. I have posted the correct 2nd video that was taken after a short drive. Edited August 14, 2011 by Rpm90001 Link to comment Share on other sites More sharing options...
Rpm90001 Posted August 19, 2011 Author Share Posted August 19, 2011 No change after oil change. I also added MMO the last 100 miles before oil change, also no change. I guess I will just live with till it get up to tempature . Link to comment Share on other sites More sharing options...
Durania Posted August 19, 2011 Share Posted August 19, 2011 My RS started doing that a few months after a HG replacement. Link to comment Share on other sites More sharing options...
Rpm90001 Posted August 20, 2011 Author Share Posted August 20, 2011 i just did my gaskets a few months ago..... I thing it was alot quieter before the change, but i bought it with bad gaskets and did not drive it before i changed them. There was a tick before, but i done remember it this loud Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now