kaki Posted August 18, 2011 Share Posted August 18, 2011 (edited) Just came across this while browsing the web,link below: http://www.rs25.com/forums/f8/t99075-4eat-diff-lock-switch-handbrake-mod-torquemada-lite.html Edited August 18, 2011 by kaki Corrections Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 18, 2011 Share Posted August 18, 2011 Yep - people have been doing the duty-c mod for years. Well known around here. GD Link to comment Share on other sites More sharing options...
Numbchux Posted August 18, 2011 Share Posted August 18, 2011 That's a good write-up. But am I reading that correctly? he's installing resistors to mimic the resistance of the solenoid so the TCU doesn't know it's not connected? Andyjo documented years ago that you can just run the wire through a switch. The only time the TCU verifies functionality of the solenoid is on startup. And if you leave it disconnected at startup, all it does is make the "AT oil temp" light flash. Much easier method: 1. find wire 2. cut and extend ends to where you want your switch 3. install switch Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now