Suba_GL_87 Posted August 18, 2011 Share Posted August 18, 2011 I HAVE A EA-82 ON 1987 SUBARU GL WAGON 4WD. Tell me how much foot-pound torque steps 9 bolts on the cycle master blots..?? I would like to perfectly for improved horsepower...u know? Message here for list steps for nine bolts for ft lb torque.. I have a beck/arnley head gasket...(should i re-torque or not?) Link to comment Share on other sites More sharing options...
Suba_GL_87 Posted August 19, 2011 Author Share Posted August 19, 2011 ? Link to comment Share on other sites More sharing options...
SoobDood05 Posted August 19, 2011 Share Posted August 19, 2011 dont have any real experience with torque specs, but heres what i found, hope this helps. http://www.uniquemotorsports.com/2011/02/subaru-head-torque-specs-and-sequence/ http://rides.webshots.com/photo/2611352520067339125VDhZqM Link to comment Share on other sites More sharing options...
idosubaru Posted August 19, 2011 Share Posted August 19, 2011 the torque sequence is all over the board and internet. you follow the *headgasket manufacturers recommendation* whether to retorque or not. if they say to follow the manufacturers torque procedures then you retorque them for the EA82. don't seal the cam towers the first time you assemble, save yourself the hassle. you'll be warming it up then tearing it down again. no point in sealing it and cleaning it all over again, just seal it at the final assembly. the fel pro permatorques are worth the price just to save this step. Link to comment Share on other sites More sharing options...
SoobDood05 Posted August 19, 2011 Share Posted August 19, 2011 Also this place has the specs, just gotta find em, from what i saw it said (1781cc sohC (ea82) 8 Valve 1994-85 ● 1st 22, 2nd 43, 3rd 47, Torque sec. 58) check for yourself if not sure, http://olybrake.com/pdf/fel_pro_torque_specs_guide SDO5 Link to comment Share on other sites More sharing options...
Suba_GL_87 Posted August 22, 2011 Author Share Posted August 22, 2011 thats cam-lobe master...? yea, i know about 1-9 steps follow of head gasket's bolts.. dont have any real experience with torque specs, but heres what i found, hope this helps. http://www.uniquemotorsports.com/2011/02/subaru-head-torque-specs-and-sequence/ http://rides.webshots.com/photo/2611352520067339125VDhZqM Link to comment Share on other sites More sharing options...
Suba_GL_87 Posted August 22, 2011 Author Share Posted August 22, 2011 got ya, thank alot! ill do re-torque it on this week. the torque sequence is all over the board and internet. you follow the *headgasket manufacturers recommendation* whether to retorque or not. if they say to follow the manufacturers torque procedures then you retorque them for the EA82. don't seal the cam towers the first time you assemble, save yourself the hassle. you'll be warming it up then tearing it down again. no point in sealing it and cleaning it all over again, just seal it at the final assembly. the fel pro permatorques are worth the price just to save this step. Link to comment Share on other sites More sharing options...
Suba_GL_87 Posted August 22, 2011 Author Share Posted August 22, 2011 double check-- 1 step 22 ft lb 2 step 42 ft lb 3-9 step 51 ft lb and re torque? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now