xbeerd Posted August 26, 2011 Share Posted August 26, 2011 SO, anyone tackle this one and eliminate the fuel temp sensor code? its just lookin for some voltage im guessing, so is it just a matter of putting a resistor between those 2 pins on the ecu? i got a couple other fuel related codes too, but i cant remember what they were Link to comment Share on other sites More sharing options...
Tosh Posted August 27, 2011 Share Posted August 27, 2011 See my topic man, your gonna throw all sorts of fuel codes, Fuel Temp, Fuel level. ahh I just noticed that you already posted there Link to comment Share on other sites More sharing options...
roostema4328 Posted September 1, 2011 Share Posted September 1, 2011 I bet you could just t into the wire that comes to the ecu already like the intake air temp sensor sig wire. and that code would go away. I would have to actually try that to varify. Link to comment Share on other sites More sharing options...
xbeerd Posted September 1, 2011 Author Share Posted September 1, 2011 (edited) Hmm... thats got me thinkin. come to think of it... my donor outback is still around. i can go dig out the fuel pump and get the sensors and see what i can find. Edited September 1, 2011 by xbeerd Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 2, 2011 Share Posted September 2, 2011 Just use the fuel pump assembly from the Outback and wire up your temp sensor. GD Link to comment Share on other sites More sharing options...
xbeerd Posted September 2, 2011 Author Share Posted September 2, 2011 yeah, i was just hoping not to have to dig it out. the cars up on jackstands up on a trailer, and everything that was pulled off the car plus some bumpers and ************ are all piled in the back of the car. also trying to eliminate extra stuff from sittin around in the car. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now