HMK110 Posted August 28, 2011 Share Posted August 28, 2011 (edited) So I picked up this car as a project-pretty good shape, changed out the Plugs/Plug wires/Dist-Cap/Fuel Filter/PCV and wiper blades. Currently the car has a rough idle, today I heard an air leak from one of the hoses behind the carb that's connected to a t fitting. the hose was split-BUT, here's the deal got a new piece of hose still runs rough if I plug the end of the hose runs great, it connects right above PCV outlet, any ideas. Also where can you buy fusable links for an old sub Edited August 28, 2011 by HMK110 Link to comment Share on other sites More sharing options...
El Presidente Posted August 28, 2011 Share Posted August 28, 2011 Leave the fixed/new hosed plugged in a find why its running rough. You probably have a vacuum leak somewhere on the other end of that replaced vacuum hose.. IIRC fusible links can be bought new, I can't remember where, but JY's are a great source! Link to comment Share on other sites More sharing options...
Subarule Posted August 28, 2011 Share Posted August 28, 2011 You can pretty much bet that if the car still has its original vac hoses that it isn't just one that needs replacing. Those hoses are like sieves when they get old. My advice: replace all of them. Link to comment Share on other sites More sharing options...
HMK110 Posted August 28, 2011 Author Share Posted August 28, 2011 Yeah that's the plan probably swap all of them over. Thanks Tim Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now