Red0ktober Posted August 29, 2011 Share Posted August 29, 2011 I have an EA81T Wagon with a blown engine, and in the same garage I have a low mile 200HP 3.5L V6 (LX9) from a 2005 Chevy. I have no use for either of them, so why not do something stupid... I'm thinking of using a T5 transmission from a Camaro which will bolt to the engine. Or Isuzu used a Borg Warner 5-speed in their 2WD trucks that is also compatible. Or if I want to be a madman, I have an Isuzu MUA5 with married transfer case. So, my first question: What will need done to delete the front drive? Link to comment Share on other sites More sharing options...
Red0ktober Posted August 29, 2011 Author Share Posted August 29, 2011 Or maybe I will just set this whole thing on an Isuzu Trooper frame, that might be easier... Link to comment Share on other sites More sharing options...
Red0ktober Posted September 2, 2011 Author Share Posted September 2, 2011 Project Isuzubaru will be commencing shortly. I'm going to block up the body and drop the subframes soon. I took some measurements today, it looks very doable. My '83 Turbo Wagon My '89 Trooper (on 30x9.5 tires, with blown engine) My 200hp 3.5 V6 (GM LX9) engine. A worn out 31x10.5. Link to comment Share on other sites More sharing options...
92_rugby_subie Posted September 6, 2011 Share Posted September 6, 2011 Ill watch this thread it might be pretty cool Might also be a pain in the rump roast. Link to comment Share on other sites More sharing options...
Red0ktober Posted September 6, 2011 Author Share Posted September 6, 2011 (edited) I don't know about the rate of progress, but I have all the parts and it could be pretty cool. I haven't welded much since taking a few years of metal shop in high school. I'm going to pick up some equipment and see what I can do. I have the subbie up on blocks now. This is a 235/75R15 on an Isuzu 15x7 alloy. Wheel will actually be rearward a bit and fender trimmed but I've figured that's roughly the height it will sit. Maybe a little higher. Now I have to drop the subframes and other bits off the Subaru, and knock the body off my parts Trooper. Edited September 7, 2011 by Red0ktober Spelling Link to comment Share on other sites More sharing options...
Red0ktober Posted September 12, 2011 Author Share Posted September 12, 2011 Empty Canvas. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted September 25, 2011 Share Posted September 25, 2011 Have you Figured out how to Fit the V6 There? Does it Fit? You'll Build a Custom Engine Mounts + Crossmember, isn't it? Good Luck! Kind Regards. Link to comment Share on other sites More sharing options...
Red0ktober Posted September 25, 2011 Author Share Posted September 25, 2011 I'm just going to mount the Subaru body on a 4x4 Isuzu frame. The engine bay would be too shallow to take a V6 on it's own. Link to comment Share on other sites More sharing options...
92_rugby_subie Posted September 25, 2011 Share Posted September 25, 2011 This will be interesting. Im assuming the EA81 body is lighter than the Izuzu? Link to comment Share on other sites More sharing options...
Red0ktober Posted September 25, 2011 Author Share Posted September 25, 2011 I'm assuming that too, but I don't know. I've been distracted by a boat that I'm trying to get running for my brother, so I haven't been working on the Subaru much. I've actually removed most of what I'm going to remove on the Subaru, I need to pull the Isuzu frame now to see exactly how things will line up. Link to comment Share on other sites More sharing options...
lostbrat Posted October 15, 2011 Share Posted October 15, 2011 v6 should fit.. i put a brat on 75 bronco frame and the 302 v8 fits in engine bay with some mods to right frame rail narrowing... has mustang headers. maybe with difrent manifolds no frame mods would be neccassry . my next attempt will be v8 drag brat..... sleeper style . will look stock and slow till i gas it:Flame: Link to comment Share on other sites More sharing options...
Red0ktober Posted October 15, 2011 Author Share Posted October 15, 2011 Do you have any pics of this build? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now