AdventureSubaru Posted September 5, 2011 Share Posted September 5, 2011 fixing a 93 impreza L for my friend and am having trouble getting the blower going. Fuses are good. Pulled the blower and tested it on the battery. (it spins fine.) The switches all seem to turn the way they should. Pulled the resistor and gave it a visual inspection. (looks okay but i have little idea what to look for apart from looking for broken coils) wondering what the next step should look like. any ideas? Link to comment Share on other sites More sharing options...
AdventureSubaru Posted September 7, 2011 Author Share Posted September 7, 2011 bump. anyone? Link to comment Share on other sites More sharing options...
lmdew Posted September 7, 2011 Share Posted September 7, 2011 Did you check for voltage at the fan plug? Test it with the fan hooked up if possible by back probing the plug. See http://www.brighterideas.com for some great electrical troubleshooting training videos. Link to comment Share on other sites More sharing options...
Cougar Posted September 7, 2011 Share Posted September 7, 2011 (edited) I suggest you at least put the motor back in place and hook up the resistor pack so the wiring is making a complete connection. Turn the blower on to the HIGH setting and see if the blower works there. If not then check to see if voltage is getting to the motor. If there is no voltage there then the blower relay is most likely at fault or there is a bad connection to the relay socket. I think the relay is located in the upper left side of the dash. If voltage is getting to the motor then the thermo protector in the resistor pack is most likely open. Edited September 7, 2011 by Cougar Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now