Jump to content
Ultimate Subaru Message Board

87' Brat clutch


opus
 Share

Recommended Posts

For an 87 Brat with an EA81 and the stock 4 speed has a 21 spline shaft.

 

An EA82 of the same year has a 24 spline shaft. (too big)dont make the mistake I did.

I got it all together and had no power to the wheels.

 

So you will need a friction disc for the 21 spline.

 

I think the earlier 80s cars had smaller clutches but im not 100% sure

The friction disc from my 86 Brat was 8 7/8"

the pilot bearing should be the same between EA81s and EA82s

For the throwout bearing in my car I had to press the old bearing off the "holder" and press the new one on.

I pulled the tranny when I did it. twice:rolleyes:

 

But ive heard it is easier to pull the engine. depending on the history of your engine this may be the time to change some gaskets.

 

I think that should be it. unless anyone else wants to chime in, maby more detail.

 

good luck:)

Edited by 81EA81
Link to comment
Share on other sites

Anyone have suggestions on where to get one online? I have checked a few places but cant seem to find an 8 7/8".

 

[ugh] I found one: http://cgi.ebay.com/ebaymotors/LuK-15-003-New-Clutch-Set-/270813480063?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f0dbdc47f#ht_500wt_1068

Mail-order works. Try Jason in Parts at 1-866-528-5282 (toll free). He's never been too busy to look up "old" parts. When he is truly busy, he'll beg off and call you back when he has the information you need. Jason works for a Subaru dealer in Auburn, WA and does all their internet or mail order sales.

progress.gif

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...