moosens Posted October 7, 2011 Share Posted October 7, 2011 I'll do my best to print the old Wish List but let's face reality here. Best thing you can do is make a list here for me. Sorry for short notice but we'll do what we can , right? Going through the infamous storage unit tomorrow. Looking to make space and raise some dough. People who's stuff is at the front of my excuse for a mind: Tommy - big order Earl - incredible seats from time warp you lucky ...... Pete-front bar , goodies , goodies , goodies ... Couple of new folks - I have some stuff written but please verify , thanks! Everybody is welcome to add at this time ! My stock is nearly all 70's these days. I DO NOT have 80's parts. This is an Old School Party Gone Out of Bounds !!!! Lots of NOS little stuff , some fenders , front bars , 1600 engines , trannies (4WD) , stuff that'll blow your mind !!! Anybody wanna help? Lunch on me , for sure and deals for helping of course. Exit 35 off I-95 in Milford CT. PM for number to call if you're serious. OOOOOOOOOOOOOOOOLLLLLLLLDDDD SSSSSCCCCCHHOOOOOLLLL !!!! Link to comment Share on other sites More sharing options...
moosens Posted October 7, 2011 Author Share Posted October 7, 2011 Reminder to buyers :-p Shipping is a pain but I do eventually get it done. Paypal works , so does check or M/O. I'll do my best to wrap thing up quick. Link to comment Share on other sites More sharing options...
bonvo Posted October 7, 2011 Share Posted October 7, 2011 looking for the 2 part right taillight for a 78 wagon and a stock steering wheel in crappy shape Link to comment Share on other sites More sharing options...
Subruise Posted October 7, 2011 Share Posted October 7, 2011 still patiently waiting for the centercaps for my magnesium ea81 12 spokes. thanx man. RV Link to comment Share on other sites More sharing options...
Datsunrides Posted October 8, 2011 Share Posted October 8, 2011 OK Paul, you asked for it. For my 73' coupe Both front turn signal lenses Front strut rubber hats Lower control arm bushings Sway bar bushings, both ends Dome light assembly or lense Glove box insert Back windshield rubbers (and trim) Door weatherstripping Quarter glass weatherstripping Trunk weatherstripping Misc rubber for quarter glass (around outside edge) Outside door glass rubbers Misc rubber for front door glass (around outside edge) Any bushings for the rear suspension Motor mounts Hood release cable Front sidemarker gaskets Heater hoses Heater valve Hood bumpers Taillight gaskets Let me know if you find any of these goodies. Mark Link to comment Share on other sites More sharing options...
moosens Posted October 8, 2011 Author Share Posted October 8, 2011 Late start but I'm coffee'd up !!! :-p Thanks guys ! Sorry I had to ask , Rob - those are a shot in the dark but I will do my best. No help ! nothing new there ....... Link to comment Share on other sites More sharing options...
moosens Posted October 9, 2011 Author Share Posted October 9, 2011 Rob, There's still more to dig out but I did find these today, Link to comment Share on other sites More sharing options...
bheinen74 Posted October 9, 2011 Share Posted October 9, 2011 Hello. Would you happen to have a full set of correct Lug Nuts for the "Sport Mags"? also need one center cap for them. PM me if you do. thanks both items small and easy ship in small flat rate box. Link to comment Share on other sites More sharing options...
rustyvolvo Posted October 9, 2011 Share Posted October 9, 2011 I'm looking for front fenders and a windshield for a '78 Brat. Do you remember seeing those in the trip to the storage unit? Thanks. Link to comment Share on other sites More sharing options...
moosens Posted October 9, 2011 Author Share Posted October 9, 2011 I'm looking for front fenders and a windshield for a '78 Brat. Do you remember seeing those in the trip to the storage unit? Thanks. Yes, I have fenders and windshield. Probably looking at costly shipping. Link to comment Share on other sites More sharing options...
rustyvolvo Posted October 10, 2011 Share Posted October 10, 2011 How clean are the fenders and what shape is the windshield in? Fenders shouldn't be too bad to ship, glass is going to be expensive but if its really nice it would be worth it. Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 All glass is I have is fine. Not sandblasted or chipped. Those taxes kill shipping on your end. I've had nothing but trouble using UPS or FedEx to Canada. If you want to look into shipping I'll follow through. Right now I really don't have time to do the legwork on shipping. My zipcode is 06604 - Bridgeport CT - but I also use FedEx Ground at the Stratford CT customer center if that helps. UPS is right around the corner from them too. ABF and other trucking companies also nearby. Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 Hello. Would you happen to have a full set of correct Lug Nuts for the "Sport Mags"? also need one center cap for them. PM me if you do. thanks both items small and easy ship in small flat rate box. No , but I think I have two NOS original lugnuts in my stash. I asked for these a long time ago and people kind of laughed and said "you just get any with the correct angle ...blah blah blah". But I always knew there were a certain style for these wheels , and I'm pretty sure I was right. When I find them again I'll post a pic and hope we can all come up with some. Been waiting a long time to use those wheels. They do deserve a Stage I Coupe. Centercap I have a couple , maybe a set since Mick says he sent me a set ....but they're all not too pretty. Link to comment Share on other sites More sharing options...
Pooparu Posted October 10, 2011 Share Posted October 10, 2011 I'm also looking for some heater and fan knobs. Oh, and an NOS dash would be nice too:lol: PM me if you have any other super cool rare and trick parts for my coupe (oh, and you are willing to sell). Link to comment Share on other sites More sharing options...
Rust Posted October 10, 2011 Share Posted October 10, 2011 1.Brush guard/push bar or square type front bumper(with the grill overrider bar) for a gen 1 car (4wd). I plan on building my own, but if I could find the factory option one, I'll take it. 2. Gold carpet for a gen 1 wagon, original floor mats would also be cool. Link to comment Share on other sites More sharing options...
rustyvolvo Posted October 10, 2011 Share Posted October 10, 2011 Don't worry about shipping outside the US. I have a place to ship them to within the US, 58265 zip code. The taxes and brokerage fees you are talking about makes it worth my time to drive 2 hours south to get across the border and do it myself. I am definitely interested in the parts. I'm not in a rush either, its a long term project but I definitely would want them. Thanks for the help. Link to comment Share on other sites More sharing options...
Subruise Posted October 10, 2011 Share Posted October 10, 2011 Rob, There's still more to dig out but I did find these today, i need the ones that look like hex nuts on the top. how much???!!! thanx a ton, RV Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 I'm also looking for some heater and fan knobs. Oh, and an NOS dash would be nice too:lol: PM me if you have any other super cool rare and trick parts for my coupe (oh, and you are willing to sell). OK , there is a dash with cracks but from a GF so it has the tacho !! Knobs - had them in a box for you with that other stuff you ....back out on. :-p No sweat ,I'll get that stuff again eventually. Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 1.Brush guard/push bar or square type front bumper(with the grill overrider bar) for a gen 1 car (4wd). I plan on building my own, but if I could find the factory option one, I'll take it. 2. Gold carpet for a gen 1 wagon, original floor mats would also be cool. There you are!! Wish I could have had you down there to help out and fill my wallet. YES , I have that iron 2x4 front bumper/protector with the loop that protects the lights and grill - somewhat. You want black or white? Carpet - I have some gold - or did - from a '76 GF with 56K on it. Floormats - see Danny W. "drivesubies" , he has them new. Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 Don't worry about shipping outside the US. I have a place to ship them to within the US, 58265 zip code. The taxes and brokerage fees you are talking about makes it worth my time to drive 2 hours south to get across the border and do it myself. I am definitely interested in the parts. I'm not in a rush either, its a long term project but I definitely would want them. Thanks for the help. Excellent !!! We'll work things out , I'm pretty sure. No rush - that's all ME !! Link to comment Share on other sites More sharing options...
moosens Posted October 10, 2011 Author Share Posted October 10, 2011 i need the ones that look like hex nuts on the top. how much???!!!thanx a ton, RV You're absolutely sure those are the exact ones you need? Man , right now I need someone to hook me up with some rustfree fenders for my '92 Legacy wagon. But we can talk cash too. Link to comment Share on other sites More sharing options...
biffanyus Posted October 10, 2011 Share Posted October 10, 2011 Hey Paul any luck on my tall order??? Link to comment Share on other sites More sharing options...
Pooparu Posted October 11, 2011 Share Posted October 11, 2011 OK , there is a dash with cracks but from a GF so it has the tacho !!. oooo... a tacho that would be nice. It's got to be in better shape then mine. I'll entertain the idea. Can you email me some photos? -earl Link to comment Share on other sites More sharing options...
Subruise Posted October 11, 2011 Share Posted October 11, 2011 Paul, im sure those are the ones i need. you need fenders? pm me im pretty sure i can come up w some. thanx man, RV Link to comment Share on other sites More sharing options...
Giant Posted October 11, 2011 Share Posted October 11, 2011 I'm in need of an ignition lock assembly for a 78 wagon. Need the whole deal: keyed cylinder, switch and bracket. Looks something like this (pic courtesy of subaru3) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now