one eye Posted October 9, 2011 Share Posted October 9, 2011 So the last run that I tried to put together had a bit of short notice to it. So this time Im giving everyone time to be able to get their cars and Calenders together for the Next one, November 5th will be the next one, for the last 2 years this has for what ever reason been our big Fall run so it would be good to get a bunch of guys together to come up and Wheel all day long.......... the trails arnt really to wet as of now so I think about 1 more month will make it a real good mess.......... Meeting place is GI Joes Parking lot off I-5 at Exit 227 in Mount Vernon @ 9:00 AM Should be leaving the Parking lot around 9:20 or so........... then Up to Walker Valley. Jeff Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 9, 2011 Share Posted October 9, 2011 OK I have a month , that should be enuf time to get it together count me in Link to comment Share on other sites More sharing options...
El Presidente Posted October 10, 2011 Share Posted October 10, 2011 I'll be there too! Link to comment Share on other sites More sharing options...
Pooparu Posted October 11, 2011 Share Posted October 11, 2011 I might even make that run myself. Link to comment Share on other sites More sharing options...
jbbvw Posted October 12, 2011 Share Posted October 12, 2011 I'll see if I can get some time in on my wagon this month. Still havn't repaired damage from July run. Been way to busy with other things. I'd love to make this one. Jesse Link to comment Share on other sites More sharing options...
one eye Posted October 16, 2011 Author Share Posted October 16, 2011 Just a bump to keep this in mind!!!!! Jeff Link to comment Share on other sites More sharing options...
Pooparu Posted October 16, 2011 Share Posted October 16, 2011 That's what she said :-p Just a bump to keep this in mind!!!!! Jeff Link to comment Share on other sites More sharing options...
one eye Posted October 20, 2011 Author Share Posted October 20, 2011 Rick is in.................. Bump Jeff Link to comment Share on other sites More sharing options...
one eye Posted October 23, 2011 Author Share Posted October 23, 2011 The Rain sure came down yesterday, I think its going to be good and muddy up there!!!! Jeff Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 24, 2011 Share Posted October 24, 2011 The Rain sure came down yesterday, I think its going to be good and muddy up there!!!! Jeff Implannenon bean there got some work to do on RED its been a year since shes been to walker Link to comment Share on other sites More sharing options...
impoutback 97 Posted October 25, 2011 Share Posted October 25, 2011 I would if I had low torque cams. Link to comment Share on other sites More sharing options...
ezapar Posted October 26, 2011 Share Posted October 26, 2011 I would if I had low torque cams. + a lift, low range, at least a rear locker, and some proper mud tires. Walker Valley is not a forest service road. Imagine how tough it is there when it's been raining. Link to comment Share on other sites More sharing options...
impoutback 97 Posted October 27, 2011 Share Posted October 27, 2011 Wishful thinking I guess. Should be close to finished with my 97 OBS build by this winter, then I should be ready for that type of terrain. I just finished installing a 4" lift and 27" tires. 3,000 miles on EJ Frankenmotor Welded rear diff with axle end swap (run a VLSD diff on road) 98 outback disc brake swap all 4 corners To do list: I'll probably do all this at once since Im going to pull my motor to do valve seals anyway D/R tranny swap (ready and waiting) port heads low torque cams (still need to order) wrx exhaust (ready and waiting) ABS On/Off switch front axles end swap for D/R stubs skid plate (if im lucky) are you guys running EJ swaps or are they the ea82'S? sounds like your either pulling your mufflers or running a carburated motor. Way more throaty sounding than my EJ. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 27, 2011 Share Posted October 27, 2011 Wishful thinking I guess. Should be close to finished with my 97 OBS build by this winter, then I should be ready for that type of terrain. I just finished installing a 4" lift and 27" tires. 3,000 miles on EJ Frankenmotor Welded rear diff with axle end swap (run a VLSD diff on road) 98 outback disc brake swap all 4 corners To do list: I'll probably do all this at once since Im going to pull my motor to do valve seals anyway D/R tranny swap (ready and waiting) port heads low torque cams (still need to order) wrx exhaust (ready and waiting) ABS On/Off switch front axles end swap for D/R stubs skid plate (if im lucky) are you guys running EJ swaps or are they the ea82'S? sounds like your either pulling your mufflers or running a carburated motor. Way more throaty sounding than my EJ. I run a EJ22 with delta Low torque cams , not goin back to the EAs Link to comment Share on other sites More sharing options...
NoahDL88 Posted October 27, 2011 Share Posted October 27, 2011 Hey Zap, you think that walker is pinz friendly? Link to comment Share on other sites More sharing options...
one eye Posted October 27, 2011 Author Share Posted October 27, 2011 I would say no but thats just me saying it. Jeff Link to comment Share on other sites More sharing options...
NoahDL88 Posted October 27, 2011 Share Posted October 27, 2011 If a cherokee can make it through I should be all right Link to comment Share on other sites More sharing options...
one eye Posted October 27, 2011 Author Share Posted October 27, 2011 oh your good then Jeff[u[/u] Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 27, 2011 Share Posted October 27, 2011 Hey Zap, you think that walker is pinz friendly? you would do fine, may add a few dents is all Link to comment Share on other sites More sharing options...
monstaru Posted October 28, 2011 Share Posted October 28, 2011 Noah, easy dude, I can think of three spots it would be tight for a longbed yota..... But my opinion may not mean as much to you.you, you.... damnit, no time to come over for this one.. HAve fun fellas...cheers,me Link to comment Share on other sites More sharing options...
ezapar Posted October 28, 2011 Share Posted October 28, 2011 The Pinz is smaller than you think. (I seriously thought I was gonna get to crash this party, but my wife has to work in the morning, I'm stuck with kids) Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 31, 2011 Share Posted October 31, 2011 well Im almost ready , will bring the RED C-dan this time its been a year since its been out to walker this time its road legal no trailer, got the EJ in er and the toyota rear axle , still have the muffler to put on and a few udder things , it wont be finished but good enuf for the first time out in this configuration , just hope to go out have a nice drive and drive er home Link to comment Share on other sites More sharing options...
one eye Posted November 1, 2011 Author Share Posted November 1, 2011 I think Im about ready to wheel to, Im gonna bring a new rear axle not sure how long mine will last thats in there. Jeff Link to comment Share on other sites More sharing options...
jbbvw Posted November 2, 2011 Share Posted November 2, 2011 I'm in! I finally straightened out my crossmember and exaust on sunday (damage from the july run). I've got a few more things to fix and check over and change some oils then I'll be ready. Looking forward to it! Jesse Link to comment Share on other sites More sharing options...
one eye Posted November 4, 2011 Author Share Posted November 4, 2011 There was a ton of rain that came down yesterday, looks like there should be rain on Saturday up there aswell, should be nice and damp by then, I got my car all sealed up and the inside should be dryin out as it sits in the shop for now, other than that Rick and I made a new mustache bar for his car so hes close to being ready, all in all the day is close now!!! Jeff Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now