afterbang Posted October 13, 2011 Share Posted October 13, 2011 So this is my situation. I have a 98 outback and I had a Legacy GT bumper painted grey to match and installed it. For years, I just had the little plastic insert things instead of the square fog lights. I scored a really nice pair of stock GT foglights but the connector from the Outback fogs doesn't fit into the connector on the GT fogs. So yeah, is there a type of universal connector that I can purchase and just cut the two ends off and use an aftermarket connector to wire these up to the stock wiring? I hope this makes sense to someone! Thanks you guys! Link to comment Share on other sites More sharing options...
Fairtax4me Posted October 13, 2011 Share Posted October 13, 2011 What bulb does the GT fog light use? If the connector plugs straight into the back of the bulb, look for a pigtail connector for that bulb. Some bulbs you can find wire pigtails at local parts stores. Others you might have to order on ebay or something. Link to comment Share on other sites More sharing options...
afterbang Posted October 13, 2011 Author Share Posted October 13, 2011 It's not like a headlight bulb socket, it's like a pigtail that extends from the cover of the back of the light. Was hoping there was a product that I could insert the cut wires into with a both male and female side so I am able to change the bulbs. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now