danz75 Posted March 14, 2004 Share Posted March 14, 2004 This is not directly sub related. I've decided to invest in a torque to use on my sub since most of the threads mention about getting the right torque on the bolts. I've seen the craftsman ones going for about $60 for the regular ones and $80+ for the 'digital' ones. HOw reliable are they and how long before they would have to be recalibrated? Thank you for the help. danz75 Link to comment Share on other sites More sharing options...
theotherskip Posted March 14, 2004 Share Posted March 14, 2004 i've got one of the regular craftsman 3/8" ones (not the digital). i've been pleased with it, and use it for everything. i think accuracy isn't everything - when torquing down things like head bolts, it is more important for them to all be the same - it doesn't matter if they are off a few ft-lbs from the spec, as long as the pressure is even. it is also rumored that sears will recalibrate them for free, though i haven't taken them up on it. also be careful with them. you never want to use them to break a bolt free, or drop them. that will screw up their calibration... Link to comment Share on other sites More sharing options...
Commuter Posted March 14, 2004 Share Posted March 14, 2004 I bought a decent one off of ebay over a year ago. New... probably just surplus stock. Shipping was a third of the cost! I only paid $18 I think for the wrench. Pleased with it to date. Commuter Link to comment Share on other sites More sharing options...
tcspeer Posted March 15, 2004 Share Posted March 15, 2004 Harbor Freight sometimes sell their 1/2 in. drive 150lb. torque for 9.95. Dont worry about it being made in China most American Mfg. are their now having their tools made including some of Craftsman products. Link to comment Share on other sites More sharing options...
myles Posted March 15, 2004 Share Posted March 15, 2004 I own Husky and Craftsman click-type torque wrenches. They're not terribly expensive, and "good (accurate) enough for government work". As another poster mentioned, in most cases, precision is more important than accuracy. I'm nothing more than a "shade tree" mechanic, but I _always_ use a torque wrench when installing spark plugs and tightening lug nuts. The wrenches are _much_ cheaper than replacement brake rotors and cylinder heads. Link to comment Share on other sites More sharing options...
danz75 Posted March 15, 2004 Author Share Posted March 15, 2004 Thanks for all the info so far. I usually do most parts replacement(haven't tried anything with the engine or transmission yet) myself since it's always so expensive to have a mech do them. I've always just tightened them by feel and I'm lucky that in my few years of working on cars, I haven't had the warped rotor due to uneven tightening of bolts but after reading about the countless number of threads about the importance of tightening the bolts to the same pressure, I figured that it would probably be a wise investment to get myself a torque wrench. I haven't had to do the HG or anything close to that yet but I'm slowly building up my inventory of tools and knowledge so that when the time comes, I will be prepared. Danz75:drunk: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now