Scott in Bellingham Posted October 25, 2011 Share Posted October 25, 2011 (edited) Just wanted to update you guys on what Ive been up to and where Im going Just introduced a few new products EJ 6" lift for gen1 and 2 legacys imps EA82 8" lift (a guy in Utah just had to have one) 2000 plus 1-1/2" lift Im getting reorganized in and around the shop will be Ordering a Tubing bender this week once setup Ill introduce a line of bumpers with and without winch mounts, will cover EA81 ,EA82, gen1 and gen2 Legacys and the 2000 + also in the future will be a subaru based buggy it will compete with the " Sidebyside" ATVS will be based off a One Doner Vehicle the EA82 plateform to start off with, will be a 2 seater caged unit can be made road legal I plan to keep one with a tow bar and tow it to the dunes, also will be introducing the 2000+ lift kits up to 6" now that I have a 2000 outback to work off , more info to come , oh yah also a repop of the EA81 factory brushbars Edited October 25, 2011 by Scott in Bellingham detail Link to comment Share on other sites More sharing options...
Crazyeights Posted October 25, 2011 Share Posted October 25, 2011 YES! I would love to have a REAL EA81 A-Bar that would fit my 83 Wagon:clap: Link to comment Share on other sites More sharing options...
ftwneon Posted October 26, 2011 Share Posted October 26, 2011 Very exciting news! Looking forward to seeing some of the new stuff. Any plans of doing any group buys next spring or when you launch some of the new items? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 26, 2011 Author Share Posted October 26, 2011 Very exciting news! Looking forward to seeing some of the new stuff. Any plans of doing any group buys next spring or when you launch some of the new items? maybe group buy the first bumpers well see Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted November 19, 2011 Author Share Posted November 19, 2011 Tubing bender showed up still havent set it up got my first EJ harness trimmed down, had some good help from a local: Adam at NW Ralley Sport hes agreat guy and specializes in Subarus only Here it is 98 Leg Wag 5 sp Been workin on the 00 6" lift heres the process first I chop up a good car bring a section in the shop flip it over and unbolt the suspension here a prototype card stock block I design the parts on CAD than try them out on the car before I have them lazer cut and bent Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted December 6, 2011 Author Share Posted December 6, 2011 got the CAD work done on the EA82 8" lift and the 9" lift , now taking orders for EA82 8" EA82 9" EA82 9" with front Diff mount for the guys that want to go with a 2nd transfercase like a Nissan 720 or others still havent tried out the tubing bender , been sitting in front the puter doin CAD work Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted December 6, 2011 Author Share Posted December 6, 2011 heres a EA82 with a 9" one I wheeled back in 2007, so with the 9" T-case kit , your own 2nd rear diff for the front some tube steel , a transfercase and some drivelines you can make a large lited rig with low gears and good clearence under the engine http://www.sjrlift.com/images/stories/DSC06283.jpg Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted December 9, 2011 Author Share Posted December 9, 2011 New diff drop for the 8 and 9" lifts, I think its cool looks like a royal crown, Heres the EJ 6" lift check out the front engine block, going with a new design Link to comment Share on other sites More sharing options...
91leglift Posted December 11, 2011 Share Posted December 11, 2011 how much for the 6 inch gen1 legacy lift Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now