1-3-2-4 Posted November 3, 2011 Share Posted November 3, 2011 Quick question are the door switches a (-) setup? Not at home right now to see if the manual shows the schematic. Link to comment Share on other sites More sharing options...
1-3-2-4 Posted November 4, 2011 Author Share Posted November 4, 2011 it's not possible to have just the hatch to unlock is it? Link to comment Share on other sites More sharing options...
1-3-2-4 Posted November 4, 2011 Author Share Posted November 4, 2011 Anyone know where I can tap in for a constant 12V source for a keyless entry? Link to comment Share on other sites More sharing options...
1-3-2-4 Posted November 6, 2011 Author Share Posted November 6, 2011 Nevermind I installed the keyless entry myself and it works fine Link to comment Share on other sites More sharing options...
itsmedavid Posted November 7, 2011 Share Posted November 7, 2011 Mind sharing how you did the install or reference material you used since you got no help here? Been thinking about doing this myself. Link to comment Share on other sites More sharing options...
1-3-2-4 Posted November 7, 2011 Author Share Posted November 7, 2011 Mine was aftermarket.. But I took off the door panel for drivers side and figured out which wire was lock and unlock.. and If I remember right white/red was lock and white was unlock. I found a source for constant 12V and that was about it. My system was the Bulldog keyless entry. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now