ShutterAce Posted November 4, 2011 Share Posted November 4, 2011 (edited) After reading about everythread here and consulting my almost useless Clymer manual I still don't know where each of the 5 wires on my ignition switch goes. My switch quit working so I'm going the pushbutton route but for the life of me I cannot find anything anywhere definitive on what wire goes where. The info I have found on the web contradicts one another and the diagram i have doesn't break down to the switch level. Anybody know what goes where? Once I get it all up and working i'll write up a ful SBS I promise. Thanks! Oh... it's a 91 Loyale 4wd M/T Edited November 4, 2011 by ShutterAce Forgot vehicle info Link to comment Share on other sites More sharing options...
ShutterAce Posted November 5, 2011 Author Share Posted November 5, 2011 Got her all figured out and completed after work. Here's a diagram of what I did. Works great. Link to comment Share on other sites More sharing options...
silverhelme Posted November 6, 2011 Share Posted November 6, 2011 Did your switch actually fail or did it start just going click when you turn the key? Link to comment Share on other sites More sharing options...
ShutterAce Posted November 6, 2011 Author Share Posted November 6, 2011 Did your switch actually fail or did it start just going click when you turn the key? The switch itself failed. The starter works great. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now