Adam N.D.J. Posted March 15, 2004 Share Posted March 15, 2004 SO, whot all need to be done with the axle issue here?? The FT's have the bigger axles, and they won't fit into the vehicle. So I would either have to have new axles made, or ??? One thing that I have been thinking of, is the diameter of the front stubs the same between the FT and the D/r 4wd tranny's?? If so I could swap the stubs from one to the other. Of course that means that there would be a Turbo only d/r 5spd floating around. So when I get done with this, would anyone be interested in the 5spd? Link to comment Share on other sites More sharing options...
Dutweiller Posted March 15, 2004 Share Posted March 15, 2004 Try with the inner end instead... You can use ea82 axles if you were to do the ea82 front end conversion Link to comment Share on other sites More sharing options...
calebz Posted March 15, 2004 Share Posted March 15, 2004 Look into shawn's current project.. RX tranny into an 84 wagon.. all your answers should be there. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now