wurkenman Posted November 15, 2011 Share Posted November 15, 2011 Hi, I’m Terry, and I’m new here. I am looking for some guidance. My son and I dropped a 1994 JDM GC8 engine in his 1992 Legacy. I am 99% sure that the wiring is correct. Spent a lot of time tracking wires. I know more about ECU’s than I ever cared to. We are using the coil on plug packs that came with the engine. Did not have the correct igniter for the engine. If anyone has any ideas about where to get the correct one let me know. Right now we tried an igniter off of an SVX, just because we thought we could just omit two of the terminals. We can get the car to turn over and fire at times using some various wire combos, but so far nothing seems to work. I am out of ideas. Where could we get a set of plug wires as we need to find somewhere to mount a coil to try the original type of ignition set up. I am open to any and all ideas at this point. Thanks any and all that might help. Terry Link to comment Share on other sites More sharing options...
bheinen74 Posted November 15, 2011 Share Posted November 15, 2011 what ecu are you using, the JDM i would have to hope. If you have the JDM intake runner, and sensors, then you also use the jdm ecu for that. If you have a usdm ecu, then you need the harness and sensors for that ecu. more info is needed. Link to comment Share on other sites More sharing options...
wurkenman Posted November 15, 2011 Author Share Posted November 15, 2011 We used the JDM ECU. Came with the engine/trans package. I added two wires on the stock wiring harness for the output of the 3 and 4 coils coming off the ECU. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now