Demon Brat Posted November 18, 2011 Share Posted November 18, 2011 What are people doing about the exhaust on these things? Has anyone had new exhaust fabricated from the motor back? I have a nice exhaust guy here in town that will bend his own stuff. Has anyone put dual exhaust on their brat? just starting our rebuild and I know exhaust will be in our future. Plan on mounting a skid plate on the front bumper brush guard. Thanks, 2 weeks into Brat ownership...and loving it. Link to comment Share on other sites More sharing options...
biffanyus Posted November 18, 2011 Share Posted November 18, 2011 Cant answer your question cause mine already had the exhaust but would love to see pics of your brat. Link to comment Share on other sites More sharing options...
MilesFox Posted November 18, 2011 Share Posted November 18, 2011 I had the luxury of welding up a stock y pipe to make it useable. I was hungover doing this. Ask this guy^^^^^ about it. you could do a dual exhaust with a x crossover between the engine and trans, as the subframe should have room for it. You may want skinny pipes to not lose torue. All of the exhaust scavenging functions are in the y pipe itself, so you will want to try and replicate that as best as possible to not lose any performance with the exhaust. a single straight pipe with the muffler at the end of the y and pipe to the rear should work well. I would recommend 1-3/4 or 1-7/8 pipe for the header, then 2 inch for the muffler and tailpipe Link to comment Share on other sites More sharing options...
Demon Brat Posted November 19, 2011 Author Share Posted November 19, 2011 Sounds like it might be better to remove the Y pipe and have it welded, patched, fixed, what ever it takes. Link to comment Share on other sites More sharing options...
biffanyus Posted November 20, 2011 Share Posted November 20, 2011 Any pics of your brat?? Link to comment Share on other sites More sharing options...
Demon Brat Posted November 21, 2011 Author Share Posted November 21, 2011 Just took a bunch of pictures tonight after taking it on it's first journey. I must remember, it is my son's Brat, but I'm sure enjoying working on it with him. Surprised him when I went to pick him up at his buddy's house in it. I will try to post some. Link to comment Share on other sites More sharing options...
kingwill Posted November 26, 2011 Share Posted November 26, 2011 I found a 79 brat in a yard in Eugene a few yrs ago, that had dual pipes, and the dual intake which of course I snagged. I have not had the time to install them. But the y pipe was cut out its straight pipe from each head to the rear of truck, there are a few supports that bolt up along the journey of the pipe. I thought it would be cool to run the dual exhaust, with the dual intake, and dual webbers. But I ran out of time and money, And it just may be over kill for the little 1600cc that is in there. Link to comment Share on other sites More sharing options...
michael appel Posted December 1, 2011 Share Posted December 1, 2011 i ran dual exhaust on mine not hard to do at all ran just 2 15 in headers before for a month Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now