bigjimd Posted November 21, 2011 Share Posted November 21, 2011 Anyone know the P/n's of the bushings needed to tighten up the shifter in a 93 loyale front drive 5mt. It would help if I call em in instead of going after work. One other quick question. The electric fan hasn't come on since we put the car back together. I jumped it out this weekend and it ran. I now have to check the sending unit. The question is should it come on with the A/C compressor or just the temp switch on the radiator. Thanks Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 21, 2011 Share Posted November 21, 2011 If yours is an EA82 with two Fans, one electric and one Fixed, driven by the Pulley; then the electric one should turn on when: The A/C is activated. The Engine's Temperature reaches slighty above the Middle. Kind Regards. Link to comment Share on other sites More sharing options...
bigjimd Posted November 22, 2011 Author Share Posted November 22, 2011 Thanks for the info. I thought it was supposed to work that way. Sorry about the first question. When I got to the dealer I found out all the different P/N's and realized what a stupid question I had asked. Link to comment Share on other sites More sharing options...
bigjimd Posted November 22, 2011 Author Share Posted November 22, 2011 Daughters going out of town so wanted to tighten things up for here as she still isn't real comfy with the 5speed so I used some insulation off a piece of 12/2 cable. It took out most of the slack. The worst one is at the shifter to shift rod junction. I know it won't last but made a big difference. We have some stout plastic thin wall hose here at work I'm going to try and find something that will work better than the insulation sleeve. Can't get parts till after the holiday. Plus I just like homegrown better. Link to comment Share on other sites More sharing options...
xbeerd Posted November 24, 2011 Share Posted November 24, 2011 there was a post about using some nylon washers/bushings or someting for this, let me see if i can find it! its like a $6 fix! Link to comment Share on other sites More sharing options...
xbeerd Posted November 24, 2011 Share Posted November 24, 2011 This is the post i was thinking of, http://www.ultimatesubaru.org/forum/showthread.php?t=127177&highlight=shifter+bushing its shown for ea81. Link to comment Share on other sites More sharing options...
bigjimd Posted November 24, 2011 Author Share Posted November 24, 2011 (edited) Thanks a bunch!! Just what I need. An ideal solution, should last forever. We have some types of high tech tubing at work and was going to try and make the bushing from that but couldn't find the right size. Besides I like the OP's design better. Just noticed something on the parts diagram print out I got from the dealer. It shows a little spring that goes to the bracket that bolts to the trans. I saw that on the car but didn't see where the other end hooks. Does anyone by chance have a pic of how that springs mounts? Edited November 24, 2011 by bigjimd Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now