Scott in Bellingham Posted November 27, 2011 Share Posted November 27, 2011 cleanin out the garage heres some one offs or misbent or discontinued stuff EA82 front bumper bracket set 2 sets available $60 for a set , 3" hole fits 2-1/2" pipe, and 1-1/4" top pipe EJ rear strut extensions 2" needs welded fits gen 1 and 2 legacy and others $30 a complete set ( 4 parts , you weld ) 3" EA82 front strut extensions just the bottom half $10 each 3" EA82 front strut extensions complete set $65 a complete set 4" EA82 front strut extension backwards SJR , and unbent plates $10 each 6" EA82 rear shock plate , just bent to far wrong angle, could be bent back and used $30 for the set check out this folder Link to comment Share on other sites More sharing options...
Prwa101 Posted January 6, 2012 Share Posted January 6, 2012 Do you still have any of those 4" ea82 strut existentions for 10$? How much would you charge me to bend them, so all that needs to be done By me is weld them up? Thanks, - Prwa Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 6, 2012 Author Share Posted January 6, 2012 Do you still have any of those 4" ea82 strut existentions for 10$? How much would you charge me to bend them, so all that needs to be done By me is weld them up? Thanks, - Prwa still have sorry wont bend they are as is Link to comment Share on other sites More sharing options...
Prwa101 Posted January 6, 2012 Share Posted January 6, 2012 Do you still have any of those 4" ea82 strut existentions for 10$? How much would you charge me to bend them, so all that needs to be done By me is weld them up? Thanks, - Prwa Link to comment Share on other sites More sharing options...
Prwa101 Posted January 6, 2012 Share Posted January 6, 2012 (edited) still have sorry wont bend they are as is ahhh i just noticed there just the top halfs, no bottoms? and kinda an interesting quistion, but would this work? take a 3" bottom and add an inch to it, to weld it to the 4" top? or will that mess the angles up? Thanks, Sorry bout the double post, my smart phone is being dumb. Edited January 6, 2012 by Prwa101 Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 6, 2012 Author Share Posted January 6, 2012 ahhh i just noticed there just the top halfs, no bottoms? and kinda an interesting quistion, but would this work? take a 3" bottom and add an inch to it, to weld it to the 4" top? or will that mess the angles up? Thanks, Sorry bout the double post, my smart phone is being dumb. yes could be done, if you want set of 3" towers I can do a set for $110 Link to comment Share on other sites More sharing options...
Prwa101 Posted January 6, 2012 Share Posted January 6, 2012 yes could be done, if you want set of 3" towers I can do a set for $110 im going to need a 4" towers, i have 3" blox in my car now that i made, but im willing to do the extra work for the strut towers (like adding and inch to the 3" bottoms to make it a 4" bottem), because i dont have over 40$ to spend, (school bills are killing me) so if that dosn't sound to crazy of me to do, from you experiences? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 6, 2012 Author Share Posted January 6, 2012 im going to need a 4" towers, i have 3" blox in my car now that i made, but im willing to do the extra work for the strut towers (like adding and inch to the 3" bottoms to make it a 4" bottem), because i dont have over 40$ to spend, (school bills are killing me) so if that dosn't sound to crazy of me to do, from you experiences? 3" blocks with 4" struts thats what my 4" kit comes with its only 1" over stock Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now