Jump to content
Ultimate Subaru Message Board

Can't find EJ22 Up Pipe Gaskets


Recommended Posts

I'm trying to find up pipe to manifold gaskets for my 1996 Legacy Outback 2.2l 5spd. I ordered them from a local NAPA store and they came back with gaskets with three bolt holes and two holes for the exhaust. The ones I need have one hole for the exhaust and two bolt holes. It looks like the muffler and cat gaskets only elongated.

 

I looked in their part catalag (2 of them actually) and it does show the three bolt gasket. Does anyone know the correct Subaru part number or perhaps what to ask for at the parts store to get the correct part.

 

Thanks for any assistance.

Link to comment
Share on other sites

Probably because you have a swapped engine.

The parts people are looking it up by the car, 96 Legacy OB, which came with a 2.5 which has the dual ports.

Tell him you have a regular Legacy with the 2.2 and you'll get the right gasket.

Keep this in mind for future parts.

BTW it's just an exhaust manifold gasket. NA cars do not have an up pipe.

 

O.

Link to comment
Share on other sites

96 Outback manual had the 2.2 stock.

 

I have the same problem trying to get manifold gaskets. Order them for a regular legacy with the 2.2 in the 96 - 99 MY range.

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Exhaust-Manifold-Gasket-Beck-Arnley_25983644-P_97_R%7CGRPEXHAAMS_____

Edited by Fairtax4me
Link to comment
Share on other sites

The 2.2l is indeed stock as has already been mentioned. I thought it might have been a mistake in their book and looked at the gaskets for the regular legacy 2.2l cars. The part numbers are the same for both. A year ago I would have spent the extra money on the dealer part off the bat but this thing has become such a rust bucket over the last winter that I'm thinking this one will do it in.

 

Does anyone know the part number for the gaskets or make a recommendation on a dealer who will be able to get them for me? After what the local dealer tried to charge me for parts last time I went there I'm not going back.

 

As for re-using them, they're completely toast.

 

Thanks for the help and responses.

Edited by Tmb9862
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...