AKghandi Posted December 6, 2011 Share Posted December 6, 2011 . take the front hub/knuckle assy. off a geo tracker and put it on a loyale with a d/r you would need custom c/vs and like impreaza struts but if my thinking is correct you would end up with locking hubs in the front.. and also the rear axle would swap pretty easy too it would be the gear ratios that would be kinda pricey.. ive crawled under both vehicles and i gotta say it looks like it would work.. i how ever have not the time place or money to tackle something like that, but it would be cool to see someone else do it.. if i figurerd right it should be mostly bolt on aside from a lil welding and minor fab work. then you would have a solid rear axle front, rear or 4wheel drive subaru with a rear e brake and 5 by 5.5 lug patern.. and air locker options..like 6 birds with one stone. (srry about the typing my laptop is all kinds of messed up..) if no one gets to this before next summer i migght end up doing it would be sweet.. Link to comment Share on other sites More sharing options...
zukiru Posted December 6, 2011 Share Posted December 6, 2011 5X5.5 is that 5X114.3? sorry I speak metric not SAE! I would love some hub locks for the front. then I could pick my driven wheels for all occasions. (i have no need for sold rear axles though.) Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 heres a pic of the rear http://www.google.com/imgres?q=geo+tracker+rear+axle&um=1&hl=en&sa=N&biw=1280&bih=668&tbm=isch&tbnid=dWAluXQsMIQVcM:&imgrefurl=http://www.cardomain.com/ride/413312/1993-geo-tracker&docid=_ra7Roi7OPb0vM&imgurl=http://memimage.cardomain.com/ride_images/1/1654/1241/4133120005_large.jpg&w=575&h=431&ei=SlTeToSWIcaQ2QW2n_D5BA&zoom=1&iact=rc&dur=427&sig=107323513995054988255&page=1&tbnh=115&tbnw=146&start=0&ndsp=19&ved=1t:429,r:2,s:0&tx=75&ty=51 and a pic of the a lift kit /front set up.http://puresuzuki.com/3_lift_kit.htm Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 (edited) it looks like if you bolted the tracker lower ball joint to the subaru control arm you could just bolt the tracker hub/knuckle up with like impreaza struts. then have a set of subaru inner tracker outer c/vs made plumb the breaks and away you go.. in theory anyways Edited December 6, 2011 by AKghandi Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 it would be a cool swap tho dont you think? and without too much of a lift it would look stock. Link to comment Share on other sites More sharing options...
zukiru Posted December 6, 2011 Share Posted December 6, 2011 looks like an a-arm kit to me. (second link) doesn't look like a macpherson strut setup at all. Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 and i think the 5 by5.5 is 5x139.7 close to the subaru orig Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 yeah. but the shock in the front is set up like a normal strut so with some minor fab work i bet it could work. Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 the rear is 3 link and i bet the 2 outer links would bolt up to the subaru stock locations the 3rd link would need brackets made. and the rear struts would also need brackets made. the drive shaft i bet would bolt up.. looks really close. the hard part would be the gear ratios. but i bet getting those made wouldnt be too hard. Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 cmon people give me some input here. Link to comment Share on other sites More sharing options...
AKghandi Posted December 6, 2011 Author Share Posted December 6, 2011 heres a front knuckle with the ball joint still attatched http://www.ebay.com/itm/1988-98-GEO-TRACKER-SUZUKI-STEERING-KNUCKLE-/200386358115?item=200386358115&vxp=mtr Link to comment Share on other sites More sharing options...
Vegablade Posted December 6, 2011 Share Posted December 6, 2011 Why not just put solid axles under it? Would be around the same or less work. And you would have more gear options and more strength. Link to comment Share on other sites More sharing options...
AKghandi Posted December 7, 2011 Author Share Posted December 7, 2011 well i like the idea of a somewhat stock height subaru with a solid rear and locking hubs up front. would be a cool build and i think a solid axle in the front would be way more difficult. Link to comment Share on other sites More sharing options...
AKghandi Posted December 7, 2011 Author Share Posted December 7, 2011 and if it was done correctly the regular subaru lift kits would still work. ive put all this together in my head. just from what ive seen and how the 2 vehicles work. i bet you could do the same thing with toyota parts.. and i know that one of the older land crusers uses 3.70 ratios plus a rear air locker?? cmon. Link to comment Share on other sites More sharing options...
bheinen74 Posted December 7, 2011 Share Posted December 7, 2011 Subaru trans front diff is open. So when you attach your custom axles to the Subaru trans, you still only got one axle turning and the other not. Your first thread post does not say what you were going to attach the custom made axles to...I assume the subaru trans,...which is open. how you gonna have front locker? Link to comment Share on other sites More sharing options...
roostema4328 Posted December 7, 2011 Share Posted December 7, 2011 crack open the case and weld up the front diff. ha ha you could do that if you had hubs that could disengage. because obviously you couldnt turn other wise ha ha. Link to comment Share on other sites More sharing options...
AKghandi Posted December 8, 2011 Author Share Posted December 8, 2011 crack open the case and weld up the front diff. ha hayou could do that if you had hubs that could disengage. because obviously you couldnt turn other wise ha ha. exaclty just weld the front diff. and drive it in rwd..or leave out the rear axle swap and just have a lsd in the rear Link to comment Share on other sites More sharing options...
Gloyale Posted December 10, 2011 Share Posted December 10, 2011 just buy a tracker......and drive that. Link to comment Share on other sites More sharing options...
AKghandi Posted December 10, 2011 Author Share Posted December 10, 2011 had one. it was gutless. and the heat sucked. but it was alot of fun. very rugged mine had the lsd in the rear so it went everywhere. but it wouldnt do 65 in 4x4 with a tail wind. my gl-10 will drift doin 65.. with enough snow and some baldish tires lol..so i wanna combine the 2. maybe with an ej25 idk yet.. i wanna go non turbo tho. it'll see some water. these are all just dreams till next sumer tho;) Link to comment Share on other sites More sharing options...
roostema4328 Posted December 10, 2011 Share Posted December 10, 2011 just ej swap the tracker. lol way easier and better as the trackers have a full frame and a real t-case. you could just use the toyota bellhousing adapter. in this thread. http://www.ultimatesubaru.org/forum/showthread.php?t=111709&highlight=series+trans get a toyota trans and t-case out of the yard. Problem solved. Link to comment Share on other sites More sharing options...
AKghandi Posted December 10, 2011 Author Share Posted December 10, 2011 well yeah i could do that but i love my wagon.. and trackers roll very easy. go ahead ask me what happend to my last tracker.. yeah rolled it. Link to comment Share on other sites More sharing options...
AKghandi Posted December 12, 2011 Author Share Posted December 12, 2011 oh and i like the idea of the ej20t swaped tracker.. make it rwd... but i have I/M to deal with. so i cant very well do a swap like that.. also looked at a justy the other day and the front suspension on the tracker and the justy are almost identical.. Link to comment Share on other sites More sharing options...
Cyfun Posted December 21, 2011 Share Posted December 21, 2011 Well, find someone with a Tracker that'll let you take a few measurements, or just grab the parts from a junkyard and see how they fit up. Link to comment Share on other sites More sharing options...
AKghandi Posted December 24, 2011 Author Share Posted December 24, 2011 no funding... and its like -10 outside.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now