mkarns Posted March 16, 2004 Share Posted March 16, 2004 Hi Again, Thanks for all the great advice about my temp gauge problem, I'm pretty convinced its the radiator and am checking on the best place to get a new one (any suggestions)? Does anyone know of a supplier for the rear rocker panel behind the back wheels from the moulding down for a '87 wagon. My are so eaten up with rust, I'm not sure there is enough for me to rivet sheet metal on and form the bottoms the way they should look. Thaks again, M Karns Link to comment Share on other sites More sharing options...
thealleyboy Posted March 16, 2004 Share Posted March 16, 2004 Mills Supply in Cleveland has rockers and wheel arches. Their # is 800-888-5072. Ask for Bill at ext 116. Unfortunately, no one I know of makes lower quarters for the wagons. I am trying to convince a guy who is interested in producing some xt panels, to do these too, so they may become available in the near futre. Still, with the rockers, wheel arches and sheet metal, you can reconstruct the rear quarter's very effectively. I have done this on my 86 wagon, and am happy with the results. Email me off the board if you have any questions. good luck, John thealleyboy@yahoo.com Link to comment Share on other sites More sharing options...
rxpilot Posted March 16, 2004 Share Posted March 16, 2004 Try RadTech Radiators in Florida. They're cheap and don't charge for shipping. There web site was down, but you can check. Their phone number is: 866-350-8324 Good Luck! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now