jkhackney Posted December 8, 2011 Share Posted December 8, 2011 This might be my first post, in that case, "Hi"! Can anyone help me with part numbers and/or an online source for PCV hoses for a 1987 EA82 OHC MPFI 3-speed automatic, non-turbo? One hose from each camshaft cover to the air intake duct, and another from the AT. Thanks! Jeremy Link to comment Share on other sites More sharing options...
idosubaru Posted December 8, 2011 Share Posted December 8, 2011 they are rather expensive for hose and the benign PCV system, but any dealer should be able to get them, just call them up. i'd just use flexible generic hose - buy it extra long so as to have room to snake it where it needs to be. Link to comment Share on other sites More sharing options...
jkhackney Posted December 8, 2011 Author Share Posted December 8, 2011 Thanks for that idea. I was shocked at the high price the last time I had to buy a part from a Subaru dealer. If a generic vacuum hose can make the bends it needs to, I'll do that. I had thought they had to be rigid and therefore pre-formed. I just thought of going to a scrapyard, but old hoses are likely as brittle as mine (24 years old but only 70k miles) and I bet they wouldn't let me take them from an engine. -Jeremy Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted December 8, 2011 Share Posted December 8, 2011 So, if this is your First Thread, I'll Say: Welcome! Yes, aftermarket Hose works Fine, 5/8" Diameter. Could I Ask if you already has the PCV Fix that the Dealer sells for those models that tend to "Suck" oil via the stock PCV Setup? Kind Regards. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 8, 2011 Share Posted December 8, 2011 They aren't that bad from the dealer - I ordered the one to the PCV valve on a Loyale not long ago and it was a little over $6. GD Link to comment Share on other sites More sharing options...
jkhackney Posted December 9, 2011 Author Share Posted December 9, 2011 Yes, lurking for a while. Don't know about mods available but mine is not modified. I broke a very brittle hose while replacing the inlet manifold gaskets. I didn't mention I'm in a small town in Switzerland. Dealer prices are really high (only one dealer within 20 miles). Not knowing the history of my vehicle, for a recent tuneup at 100k km I inquired about a fuel filter, emissions canister, air filter, PCV valve, and dizzy cap/leads/plugs/rotor. It would have been $700 equivalent. I whined at the tally and decided not to buy most of it (got it at rockauto instead, or didn't replace some things at all); in Switzerland an "inquiry" is nearly as binding as an "order" so it was quite rude of me. Not enough time has passed for me to show my face again. There's also a good chance that non-OEM parts won't pass inspections but in the case of vacuum hoses I think I'd just get a warning and 3 weeks to fix it before a new inspection. BTW my Subaru is called a "Swiss" Super Wagon. It's got a higher roof and some differences in the taillights, and some kind of automatic 4WD button that my Subaru in the U.S. didn't have. -Jeremy Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted December 10, 2011 Share Posted December 10, 2011 ... my Subaru is called a "Swiss" Super Wagon. It's got a higher roof and some differences in the taillights, and some kind of automatic 4WD button that my Subaru in the U.S. didn't have. -Jeremy Thanks for your Kind Answer, Jeremy. I Believe that those prices are High for that Stuff... Could you Post Pictures of your Super Wagon? Kind Regards. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now