tcu question

[95legwagon]

hey guys i got a 95 legacy ej22e 4eat

 

i am looking for the color of the wire for the duty c solenoid or the diagrahm of the pinout for this tcu. i am putting in the switch for lockin the rear diff up for true awd lol.

 

pullin my hair out trying to find it

 

any help would be much appreciated

 

thanks guys!

 

-jarrid

[johnceggleston]

i didn't re-read these but a search for "tcu* pinout" found three. it's a start.

 

http://www.ultimatesubaru.org/forum/search.php?searchid=1395623

 

 

http://www.main.experiencetherave.co..._I-O_page1.jpg

 

http://www.main.experiencetherave.co..._I-O_page2.jpg

 

 

 

 

 

 

.

[95legwagon]

i found those already and did the test with a dmm and havent found the wire yet...... thanks though! does anyone know by any chance if those pinouts in the second or third link are the same as my 95 4eat?

 

maybe i am testing wrong or maybe my dmm isnt doing so well.....ive seen smoke from it before....but it still works for resistance LOL.

 

anyways thanks in advance!!!

 

-jarrid

[johnceggleston]

some changes may have been made in the 95 because of odb, but the duty c pin did not change.. cut it and see.

 

good luck.

[idosubaru]

here's a 1995 Legacy Factory Service Manual wiring diagram for the TCU and the connector.

 

double check but i'm seeing:

 

"WB" for color.

 

pin B3 on the TCU and pin 11 on the connector.

 

Edited December 24, 2020 by idosubaru

[95legwagon]

thank you everyone!

definitly think i know which one it is now! like grossgary said w/b

ive read that other places too and i remember seeing that!

 

thanks again