Jump to content
Ultimate Subaru Message Board

ea81 lift questions


subaruglkid
 Share

Recommended Posts

i dont really have the money to go out and buy a lift or even know where to get one but i wanted to know if anyone could point me in the direction of how to make myself a lift and how much i can lift my 1984 gl hatch with just blocks/spacers. thanks guys sorry im new and just got my subie today

Link to comment
Share on other sites

4 inches is very popular. the rear blocks

would be super easy to make.

 

i decided on 2 inches in rear and 3 in front.

 

i didnt make my own, but a lot of people have.

 

one eye is kinda famous for his, hes done a few.

 

 

the wheels and tires are a major part of getting an ea81

higher off the ground. the main reason most these guys

lift the body, is just to fit those taller meats under the

wheel wells. try a 215-70-15.

Link to comment
Share on other sites

"how HIGH" you can go, im not sure theres technically a scientific limit.

 

but 4 inches is by FAR the most popular lift around. theres probably a

dozen 4" brats for each lift of any other size. but i know there are also

6's and i think theres even a 9 and a 12 out there....

 

my advice is, 4 is plenty, and its safer, less chance of flexing the bolts

going around a corner, until they snap, or until you roll over off a cliff, lol...

 

the ea81s are independent suspension, which means, when you get that far

up in the clouds, theres not much stability. toyota pickups and such can

handle a lot of lift. solid axle. but when each wheel moves SEPERATELY,

thats a LOT of potential wobble and roll.

Link to comment
Share on other sites

hmmmm is the brats shock mount the same bolt pattern? do you know any good sites i could maybe find a site at? i mean i do have the tools and im not mechanically challenged but it looked like all i really had to do (for the front at least) was cut 2 pieces of steel the same shape and what not of the shock mount and just separate the two with some steel pipes and weld the crap out of them. if that is the way to do it would the back shocks be the same?

Link to comment
Share on other sites

no no i meant weld the lift together like sammich style with the pipes or blocks in the middle and two plates for the shock/strut surface and bolt it onto the body. its essentially just pushing the suspension down and lifting the body up right? what if i made a two inch lift and made some fiberglass fenders (to keep the originals fresh) and made them like trophy truck style...:headbang:. oh and thank you scott that will help a lot. how much of a lift is that?

Link to comment
Share on other sites

scotts stuff is, i have always heard, top-notch quality.

 

a baja pre-runner brat would look AWESOOOME.

 

not sure how a fwd primary/4wd hi-lo platform would

 

compare to the usual tacoma and ranger approach of

 

rwd only. i think those baja trucks are usually just rwd,

 

no front action at all....

 

doesnt mean it wouldnt be cool though. even in front 2wd,

 

my brat does pretty good offroad. a lot of times, i dont even

 

bother shifting into 4hi. seems unnecessary most of the time.

Link to comment
Share on other sites

back shocks, people usually just make a Horseshoes looking extension, about the size of a pack of cigs. you could just use longer shocks, but the tops end up angled in farther than subaru had in mind, so i think it may affect the ride??

 

i think if you are confident and capable of making the strut tower yourself, the rear shock extension should be easy breezy, butler geezy.

speaking of geezer, whats up with ozzy? that douche would sell out for ANY commercial that offered him 5 bucks!! minivans, now?? whats next, tampon commercials? allergy medication commercials??? seriously? minivans? what the hell, ozzy?

Link to comment
Share on other sites

ill work on the fenders soon as possible but would 31 inch tires be too much for the stock gearing? and yea the prerunner trucks are almost 95% of the time just rear wheel but they are also like 600hp and 1500-2000 pounds. but the ultimate goal of the fenders would be to raise the ridgeline and pop it out so at a hardcore flex itll tuck up into the fender and wont touch anything while still protecting your windshield from rocks and mud and what not. but anywho ive got family up in bellingham where sjr is so i might have to check it out in person. but my goal is maybe a 2 inch lift with like 28 inch tires. but yes ozzy is a sellout. but mostly funny as hell commercials tho.

Link to comment
Share on other sites

 

the ea81s are independent suspension, which means, when you get that far

up in the clouds, theres not much stability. toyota pickups and such can

handle a lot of lift. solid axle. but when each wheel moves SEPERATELY,

thats a LOT of potential wobble and roll.

 

This is hogwash.

 

A Subaru with a lift is WAAAAY more stable in every way to a lifted toyota. ESPESCIALLY, an older solid front axle one.

 

The key to a safe EA81 lift is to crossbrace the rear blocks so that they can't sway side to side.

 

I built a brace that bolts in between the body and the blocks, and then diagonally down to the middle where it ties in to the front part of the diff mount.

 

Kinda like |\/|

  • Like 1
Link to comment
Share on other sites

This is hogwash.

 

A Subaru with a lift is WAAAAY more stable in every way to a lifted toyota. ESPESCIALLY, an older solid front axle one.

 

|\/|

 

 

mmhmm. And you've formed this opinion because you've had both and have had the chance to drive them on the highway and around sharp corners?

That's not the opinion I've formed after owning both, I can tell you that.

 

 

We called this one the Weeble for a good reason.

 

main.php?g2_view=core.DownloadItem&g2_itemId=140&g2_serialNumber=2

Link to comment
Share on other sites

mmhmm. And you've formed this opinion because you've had both and have had the chance to drive them on the highway and around sharp corners?

That's not the opinion I've formed after owning both, I can tell you that.

 

 

We called this one the Weeble for a good reason.

 

main.php?g2_view=core.DownloadItem&g2_itemId=140&g2_serialNumber=2

 

Yes I've owned Solid axle trucks.

 

My dad has an 83 Toyota. I've had a Ford F-350. Both stock.

 

My 6 inch lifted EA81 (ea82 front suspension) Handles better than either of them.

 

The center of gravity in a STOCK toyota truck is higher than my Lifted EA81.

 

Craziest vehichle I've ever driven was an Isuzu trooper with 3 inch body lift and 33's. Felt like it was gonna role turning right from a stop sign.

 

C'mon.....think about it......... Solid axles handle better than independant suspension? not hardly.

 

Unless we are talking boulder crawling:headbang:

Link to comment
Share on other sites

6 inches, 235's and no sway bars makes an ea81 wagon pretty squirrely.But I still drove 70 down the highway.The Toyota trucks I have driven were a very long time ago,but the solid axle ones had at least 33's on them with body lifts, and I can say that even then it did not matter much.Stable as can be .

It is a moot point to vantage your own opinion of handling to anothers.Driving styles are way to different.

cheers

Link to comment
Share on other sites

also, KIM JONG IL, cause his memoirs prove that he could run a 2 minute mile, bowl a 300, and golf 6 under par on any PGA golf course.

 

seriously, he officially claimed that, and they were under-thumb enough to just automatically, sheepily accept those and any other claims as instant reality.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...