95legwagon Posted December 19, 2011 Share Posted December 19, 2011 well ive already replaced this tailshaft housing gasket on my 4eat. (btw 95 leg wagon ej22) it lasts for like a week then starts leaking right on the cat. and smoking. im getting so sick of this. ive made sure everytime that the gasket surfaces were old gasket free and clean. nothing is marred. the first time i used the "make a gasket goo" and it worked for like a month. 2nd time was factory gasket as well as 3rd and 4th. im thinkn bout dealing with it leakin for a lil while and saving up to do a 5mt swap...... any thoughts? or suggestions? like i said im at my wits end! thanks guys! -jarrid Link to comment Share on other sites More sharing options...
Redcap Posted December 20, 2011 Share Posted December 20, 2011 5MT swap for the win. Link to comment Share on other sites More sharing options...
95legwagon Posted December 20, 2011 Author Share Posted December 20, 2011 agreed LOL i want to soooo bad cuz i miss a 5spd. thats all ive owned until this subaru and a truck. but first id need a detailed parts list on what i need ( and whether i can buy certain things used and be fine or not) i know id need a 5mt (obviously) pedals, clutch plate, flywheel, clutch master and slave cylinder, some wiring has to be done, without getting a new center console id hafta get a short throw shifter, a matching rear diff, mt tranny crossmember, driveshaft for mt for a wagon. am i missing anything? (pretty sure i am) any places that have really good prices on certain things? thanks jarrid Link to comment Share on other sites More sharing options...
nipper Posted December 20, 2011 Share Posted December 20, 2011 SOunds like a warped surface of some kind, how that happened i have no idea. Do you tighten the bolts in a star pattern to the proper torque? Link to comment Share on other sites More sharing options...
95legwagon Posted March 4, 2012 Author Share Posted March 4, 2012 yes every time! lol time for a 5 speed.... in about 2 weeks Link to comment Share on other sites More sharing options...
1982gl4 Posted March 4, 2012 Share Posted March 4, 2012 agreed LOLi want to soooo bad cuz i miss a 5spd. thats all ive owned until this subaru and a truck. but first id need a detailed parts list on what i need ( and whether i can buy certain things used and be fine or not) i know id need a 5mt (obviously) pedals, clutch plate, flywheel, clutch master and slave cylinder, some wiring has to be done, without getting a new center console id hafta get a short throw shifter, a matching rear diff, mt tranny crossmember, driveshaft for mt for a wagon. am i missing anything? (pretty sure i am) any places that have really good prices on certain things? thanks jarrid Don't forget to get the bolts that hold the flywheel to the crank. The manual ones are much longer. Also I believe the manual EJ's have a different starter where it mounts to the trans is a bit smaller than the autos. When I did the swap on the 92 legacy I have, I had to push start it and drive it home without a starter because I didn't realize this Link to comment Share on other sites More sharing options...
95legwagon Posted March 4, 2012 Author Share Posted March 4, 2012 lmao that musta been fun.... i do know about the starter and i do plan on getting the mt flywheel bolts....just gotta find them....i have a starter sitting at work for $75.... i can probably get it cheaper at a pick n pull yard though Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now