RAYJAY Posted January 9, 2012 Share Posted January 9, 2012 hi all i need 2 of the rear strut bolts the long bolts and nuts that fasten the strut to the lower knuckle does any know the size and thread of it even if any one has a part number would help?? Jeff Link to comment Share on other sites More sharing options...
Fairtax4me Posted January 9, 2012 Share Posted January 9, 2012 I think they're 14mm thread. You can probably use 9/16" grade 5 or better bolts from a hardware store if you're in a pinch. Otherwise just grab some out of a junkyard. Or I bet someone here on the board has some laying around on a bench somewhere. Link to comment Share on other sites More sharing options...
jarl Posted January 9, 2012 Share Posted January 9, 2012 No idea if your car is a B12 or B13 (btw: it's a good idea to include that information with your post so people don't need to go to gather the information). That being said, opposed forces can help you out: http://opposedforces.com/parts/legacy/us_b12/type_3/suspension_and_axle/rear_suspension/illustration_3/ There's a good chance the bolt is the same for both chassis Link to comment Share on other sites More sharing options...
RAYJAY Posted January 9, 2012 Author Share Posted January 9, 2012 sorry about that 2004 LGT its the rear lower bolts they look like 14 mm x 100mm long think its a 1.5 thread a 5/8 bolt may work ?/ cherryed the nuts and every thing they were welded had to cut one off Link to comment Share on other sites More sharing options...
jarl Posted January 9, 2012 Share Posted January 9, 2012 I think this is what you are looking for: BOLT FLANGE 14X111X25 [Part# 901000177] $3.31 each from 1stSubaruParts, which is located in Renton Link to comment Share on other sites More sharing options...
RAYJAY Posted January 20, 2012 Author Share Posted January 20, 2012 part number is correct and thanks for the help jeff Link to comment Share on other sites More sharing options...
bork Posted January 20, 2012 Share Posted January 20, 2012 No idea if your car is a B12 or B13 (btw: it's a good idea to include that information with your post so people don't need to go to gather the information). That being said, opposed forces can help you out: http://opposedforces.com/parts/legacy/us_b12/type_3/suspension_and_axle/rear_suspension/illustration_3/ There's a good chance the bolt is the same for both chassis THANK YOU!!! for the link of parts breakdown. Been looking for a good site! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now