ScottyBigs Posted May 29, 2014 Share Posted May 29, 2014 Yes Its better for your engine to run without an egr anyway. I usually take the threaded end off the metal tube and weld a bolt in the center hole, then throw it back in. The last motor I did I didn't have a welder nearby so I cut the tube, but I left a piece of the tube with the flared fitting. Then I dropped a screw upside down in the egr hole and put the threaded end/pipe piece back in the egr hole, worked great. Josh So I'm not ganna have a problem with the heads on the opposite sides? Because my motor is in the car now and I really don't want to pull it just to swap heads. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now