trucking45 Posted January 22, 2012 Share Posted January 22, 2012 Okay so today me and my step dad where using some carb and choke cleaner today and he noticed the secondory wasn't working even at higher rpms it wouldn't work he had to manualy work it...so how does it normally work? If you need better pics just let me know Link to comment Share on other sites More sharing options...
TeamCF Posted January 22, 2012 Share Posted January 22, 2012 The secondary is not really RPM/vacuum dependent on the Weber 32/36. Its throttle position dependent. I'd have to go out and look but I think it's about 2/3rds of the way to full throttle and it'll open using the linkage you posted in your first pic. Even with the engine off, if you push the pedal all the way to the floor it should open. If it's still not opening then it's possible something is not catching right in the linkage between the two. Looks right to me in the pics (as in nothing missing). But a more trained Weber eye might catch something I'm missing. The part you are holding open in the center pic is the choke. The first pic shows the link that opens the secondary. (Just to make sure we have things clear. ) Link to comment Share on other sites More sharing options...
trucking45 Posted January 22, 2012 Author Share Posted January 22, 2012 Know somebody to go to, to have it looked at by a "pro" on weber carbs? Link to comment Share on other sites More sharing options...
TeamCF Posted January 23, 2012 Share Posted January 23, 2012 Not really. I've been able to get a lot of info on them online. Punch "Weber 32 36" into a search and all kinds of stuff comes up. Granted a lot of it is for other vehicles with different sized engines, so jetting and such will be wrong. But basic setup is the same to just make it work. Some info here: http://www.redlineweber.com/html/Tech/Table_of_contents.htm Note that not all of the info is for the 32/36. I ended up going out and picking up a book on Webers. Right now I have the Haynes one, but I know there are better ones out there. You can proly find it or have it ordered in at a local auto parts store. If you have a VW shop nearby they proly have all the books. As well as parts and guys that know their way around them. Only had mine for a couple months now. Great carb once you get it figured out. Still have a few tweaks needed on mine as far as jetting goes for the secondary. Link to comment Share on other sites More sharing options...
trucking45 Posted January 23, 2012 Author Share Posted January 23, 2012 alright thanks man so :clap:much Link to comment Share on other sites More sharing options...
TeamCF Posted January 23, 2012 Share Posted January 23, 2012 No problem. And I forgot to mention. If you ever make it up near Portland you can go to Discount Import Parts. Over in Milwaukie. http://www.discountimportparts.com/ They are where I got my book. And I know they have other Weber books as well. And lots of Weber parts, air cleaners, fittings, jets, etc. I would think there is a good place down near you, but if all else fails. Link to comment Share on other sites More sharing options...
trucking45 Posted January 23, 2012 Author Share Posted January 23, 2012 No problem. And I forgot to mention. If you ever make it up near Portland you can go to Discount Import Parts. Over in Milwaukie. http://www.discountimportparts.com/ They are where I got my book. And I know they have other Weber books as well. And lots of Weber parts, air cleaners, fittings, jets, etc. I would think there is a good place down near you, but if all else fails. I do need to start looking around for import part's stores ect. Just havnt had the time latly Link to comment Share on other sites More sharing options...
BratWarrior Posted January 23, 2012 Share Posted January 23, 2012 Discount ImPort deffinately rules. Get to know your Weber by reading as mitch info you can in this thread. http://www.ultimatesubaru.org/forum/showthread.php?t=29778 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now