Bevan Posted January 23, 2012 Share Posted January 23, 2012 I'm looking into doing the swap... i have little money but i have tools and a garage, it seeems to make sense to do this swap. my question: has anyone done this swap in NY state and been able to pass inspection? or another state that does OBD inspections? if the cel isn't on i should be able to pass inspection right? ...thanks Link to comment Share on other sites More sharing options...
porcupine73 Posted January 23, 2012 Share Posted January 23, 2012 (edited) Hm...main issue there might be getting a 2.2L to work....because the 2000 Outback engine uses the MAP/speed density method for airflow measurement...whereas the 2.2L, at least from the 90's used the MAF. But even if getting the wiring harness and ECU, I don't know that would easily interface to the 4EAT phase II TCU....but other than that, I would imagine if it works, and the CEL is off, and all the I/M's go to ready (so do not use a 96 ECU, and the charcoal canister and purge etc solenoids are required), then it should pass NY basic emissions inspection. If you have to do a dyno run or tail pipe sniff test those can be tricky. If yours is just dripping coolant out the HG's...they can run like that for a long time if you keep the radiator full. Sometimes the coolant additive can help at least slow down that drip. Edited January 23, 2012 by porcupine73 Link to comment Share on other sites More sharing options...
Bevan Posted January 23, 2012 Author Share Posted January 23, 2012 2000 OB overheated badly, has no compression in one cylinder, won't run at all, from what I've read '95 - 98 2.2s will bolt and plug right in...so if anyone has done this swap and passed NY or similar inspection ... please chime in.. thanks Link to comment Share on other sites More sharing options...
Rooster2 Posted January 23, 2012 Share Posted January 23, 2012 2000 OB overheated badly, has no compression in one cylinder, won't run at all, from what I've read '95 - 98 2.2s will bolt and plug right in...so if anyone has done this swap and passed NY or similar inspection ... please chime in.. thanks A 95-98 2.2 will NOT bolt in, and plug and play in your car, as the 2000 Subie cars went to a different engine management system, as porcupine 73 described to you. Your best bet is to find a 2.5 phase 2 motor from a model year beginning 2000-2005. I am not sure about the 2005 model year. Others here will clarify the year spread, that will work in your car. Check wrecking yards where you live for prices and availability. Engines from Legacy, Impreza, and Forester will work. Link to comment Share on other sites More sharing options...
johnceggleston Posted January 23, 2012 Share Posted January 23, 2012 (edited) the 99 legacy ej22 will / should swap in since it is a phase 2 engine like the one you have. and the 99 - 00 impreza ej22 should swap in just fine as well. but other than those engines (actually the same engine) you will have to find an ej25 from 00 - 04. 99 was the last year the 96 - 98 ej22 was swappable for the ej25. starting in '00 ('99 for the forester ej25s and all ej22s) all ej engines are phase 2 and will not swap with phase 1 engines. note: the blocks will swap from phase 1 to phase 2 but you have to use the original heads and intake. Edited January 23, 2012 by johnceggleston Link to comment Share on other sites More sharing options...
Bevan Posted January 24, 2012 Author Share Posted January 24, 2012 the 99 legacy ej22 will / should swap in since it is a phase 2 engine like the one you have. and the 99 - 00 impreza ej22 should swap in just fine as well. but other than those engines (actually the same engine) you will have to find an ej25 from 00 - 04................thank you... that is what i was looking for... I'm off to find an engine Link to comment Share on other sites More sharing options...
johnceggleston Posted January 24, 2012 Share Posted January 24, 2012 search http://www.car-part.com for an engine. put in your zip code and sort by distance for what is close to home. then sort by price and go the ''cheap'' ones and see if shipping one in might be less, you never know. Link to comment Share on other sites More sharing options...
idosubaru Posted January 24, 2012 Share Posted January 24, 2012 yes - you need ANY 99+ EJ22, that will work. they are kind of pricey since there aren't many of them around and they were phasing out EJ22's which are no longer used post 2001. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now