courtney Posted February 5, 2012 Share Posted February 5, 2012 does anyone know much about finding used driveshafts for these cars? will any legacy wagon auto fit mine? Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 5, 2012 Share Posted February 5, 2012 Driveshaft is two sections. Rear section is the same between manual/automatic but the front section is not. GD Quote Link to comment Share on other sites More sharing options...
courtney Posted February 5, 2012 Author Share Posted February 5, 2012 thanks gd! Quote Link to comment Share on other sites More sharing options...
courtney Posted February 5, 2012 Author Share Posted February 5, 2012 Does anyone know if a 93 auto legacy driveshaft should fit my 99? Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 5, 2012 Share Posted February 5, 2012 93 will not have the right flange bolt pattern. You will need a 96 to 99 rear section and you may need a 99 specifically for the front section as the auto's chagned in design in '99. I do not know if the '00 and up use the same driveline as the '99 even though the tranny is the same because the body style changed and thus they could be longer. I'm fairly confident that a '96 to '99 rear section will work - just probanbly not the front. A Subaru dealer could tell you for certian what part numbers will interchange, etc. GD Quote Link to comment Share on other sites More sharing options...
courtney Posted February 6, 2012 Author Share Posted February 6, 2012 thanks so much for all this info guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.